Teignbridge Propellers Spare Part
Aqualube Marine Bearings
Teignbridge Aqualube water-lubricated bearings: tough nitrile rubber moulded into bronze or non-metallic shells, in sleeved and flanged versions for metric and imperial shafts from 20 mm/3/4 in. up to 320 mm/12.5 in.
Description
Aqualube marine bearings from Teignbridge are water-lubricated rubber bearings in sleeved and flanged versions for marine and industrial use. The bearing surface is a specially formulated nitrile rubber, moulded into a choice of shell materials. The rubber is tough, chemical- and oil-resistant, and has high resistance to abrasion and wear.
Configurations
- Bronze shelled series: metric shafts from 20 mm to 150 mm diameter; imperial shafts from 3/4 in. to 6 in.
- Non-metallic shelled series: for installations where metal-to-metal contact would cause electrolysis; shafts from 3/4 in. or 20 mm to 6 in. or 150 mm
- Bronze shelled flanged series: imperial and metric sizes from 3 in. to 12.5 in., or 85 mm to 320 mm diameter
- Standard sizes in imperial, metric, and metric bore with imperial outside diameter
- Special bearings with spiral grooves or replaceable staves, and split bearings, made for specific applications
More from Teignbridge Propellers
- Teignbridge Propellers Cast Bronze and Fabricated Steel Rudders
- Teignbridge Propellers Clamp on Blade (CoB) Replaceable Blade Propeller
- Teignbridge Propellers Custom Design Propellers
- Teignbridge Propellers Leisure Propeller Designs
- Teignbridge Propellers Marine Stern Tubes for Stern Gear Assemblies
- Teignbridge Propellers Military Propeller Designs
- Teignbridge Propellers Rapid Replacement Propeller Service
- Teignbridge Propellers Standard Propellers for Production Boats
- Teignbridge Propellers Superyacht Propeller Designs
- Teignbridge Propellers Tapered and Clamp-Type Shaft Couplings
- Teignbridge Propellers Teignbridge Propeller Design Range
- Teignbridge Propellers Velocity Aligned Rudders (VAR) and Velocity Aligned Brackets (VAB)
Featured products
All products →
Equipment
Fernstrum® GRIDCOOLER® Keel Cooler
Factory-assembled 90/10 copper-nickel keel cooler with a one-piece brazed header, 56% silver-brazed joints and Fernstrum's exclusive enhanced-interior tubing — the long-established choice of naval architects for closed-circuit engine cooling.
Component
A100-M Axial
Accelleron A100-M Axial turbochargers for large four-stroke medium-speed engines (5,500 kW and up) in heavy-duty marine applications, with pressure ratios up to 5.8, 70% efficiency and readiness for methanol, ammonia and hydrogen.
Equipment
Cat C1.5 Marine Generator Set
Compact 3-cylinder 1.5 L naturally aspirated diesel marine genset, 10-12 ekW at 1500/1800 rpm (50/60 Hz), U.S. EPA Tier 3, available open or with sound enclosure.
Similar products