Thordon Bearings Spare Part
Thordon SXL Rudder Bearings for Workboats and Tugs
Thordon SXL grease-free rudder bearings for workboats and tugs, up to 12 N/mm² (1,740 psi). Pintle, stock and carrier disc bearings; SXL, TRAXL or ThorPlas for steering linkages, tiller arms and fin stabilizers.
Description
Thordon SXL rudder bearings are self-lubricating polymer bearings that remove the need for grease in rudder bearing applications above and below the waterline. For workboats and tugs, the range also covers steering linkages and tiller arm bushings.
Key features
- Self-lubricating, so no grease or greasing system is needed, which removes the risk of grease pollution
- For rudder bearings above and below the waterline
- Low friction
- Operating pressures up to 12 N/mm² (1,740 psi)
- Withstands high shock loads and edge loading
- Thordon self-lubricating rudder stock seals are available to complete the package
Configurations
- SXL pintle, stock and carrier disc bearings
- SXL, TRAXL or ThorPlas for grease-free steering and linkage applications and fin stabilizers
- ThorPlas is recommended for the more highly loaded tiller arm and "jockey-bar" linkage bushings on workboats
Applications
- Workboats and tugs, for newbuilds and repairs
- Bearing sizing uses the Thordon Bearing Sizing Calculation Program
More from Thordon Bearings
- Thordon Bearings Thordon COMPAC and SXL Propeller Shaft Bearings for Fishing Vessels
- Thordon Bearings Thordon RiverTough and SXL Propeller Shaft Bearings
- Thordon Bearings Thordon Shaft Seals for Fishing Vessels (TG100)
- Thordon Bearings Thordon Shaft Seals for Workboats and Tugs (TG100)
- Thordon Bearings Thordon SXL Rudder Bearings for Coastal Workboats
- Thordon Bearings Thordon SXL Rudder Bearings for Fishing Vessels
- Thordon Bearings Thordon TG100 Tailshaft Seal for Coastal Workboats
- Thordon Bearings Thordon TG100 Tailshaft Seal for Fishing Vessels
- Thordon Bearings Thordon Water Quality Package
- Thordon Bearings Thordon TG100 Tailshaft Seal for Workboats and Tugs
Featured products
All products →
Equipment
OMEGA Clamp-On Laser Plate Heat Exchangers
Laser-plate jackets that clamp onto existing tanks and vessels to add heating or cooling — usually no welding on the tank and far cheaper than a new jacketed tank.
Equipment
Everllence B&W ME-C Two-Stroke Engine
Electronically controlled low-speed two-stroke main engine range for ocean-going merchant vessels: 4,350–82,440 kW, 35–95 cm bore, 5–12 cylinders, 56–167 rpm, with retrofit paths to dual-fuel operation.
Component
A100-M Axial
Accelleron A100-M Axial turbochargers for large four-stroke medium-speed engines (5,500 kW and up) in heavy-duty marine applications, with pressure ratios up to 5.8, 70% efficiency and readiness for methanol, ammonia and hydrogen.
Similar products