Logan Clutch Component
Logan PTO 1000 Direct Drive PTO Clutch
Logan PTO 1000 SAE D direct drive PTO clutch: 1000 ft-lb (1356 Nm) rated torque, 570 HP, 3000 RPM, 90–110 psi actuation, SAE D or F spline output.
Description
The Logan PTO 1000 is a direct drive PTO clutch with SAE D mounting for high-torque pump and auxiliary drives.
Technical data
- Rated torque (max): 1000 ft-lb / 1356 Nm
- Static torque: 1284 / 1439 / 1595 ft-lb at 90 / 100 / 110 psi
- Maximum power: 570 HP / 425 kW
- Maximum speed: 3000 RPM
- Rotation: bi-rotation
- Actuation pressure: 90–110 psi (6.2–7.6 bar)
- Minimum flow rate: 1.5 GPM / 5.6 l/min
- Maximum back pressure to tank: 4 psi / 0.3 bar
- Maximum fluid temperature: 180 °F / 82 °C
- Wet input seal (optional): 30 psi / 2 bar
- Weight: approx. 63 lb / 29 kg
- Materials: alloy steel output hub, anodised aluminium housing
Output options
- SDD-1004: SAE D spline 13T 8/16 DP
- SDD-1005: SAE F spline 15T 8/16 DP
The output end cannot support side loads; overhung load adapters should be used.
Specifications
| Part No. | Output Description |
|---|---|
| SDD-1004 | SAE ‘D’ spline 13T 8/16 DP |
| SDD-1005 | SAE ‘F’ spline 15T 8/16 DP |
| SAE Face (input & output) | D4-bolt pattern | C | 8.58 mm217.9 mm | G | 6.002 in152.5 mm |
|---|---|---|---|---|---|
| SAE Spline | D / 13T/8/16 DP | D | 0.69 in17.5 mm | H | 6.364 in161.6 mm |
| A | 2.93 in74.4 mm | E | 6.000 in152.4 mm | J | 3.48 in88.4 mm |
| B | 0.62 in15.7 mm | F | 10.75 in273.1 mm |
| col1 | U.S | S.I. |
|---|---|---|
| *Rated Torque (Maximum) | 1000 Ft/Lbs | 1356 Nm |
| Maximum HP | 570 HP | 425 KW |
| *Maximum RPM | 3000 RPM | 3000 RPM |
| Rotation | Bi-rotation | Bi-rotation |
| Maximum Actuation Pressure | 110 psi | 7.6 Bar |
| Minimum Actuation Pressure | 90 psi | 6.2 Bar |
| Displacement (Maximum) | 8 in3 | 131 cm3 |
| Minimum Flow Rate Required | 1.5 GPM | 5.6 Liters/min |
| Operating Media at Clutch (Oil or Air) | Standard | Standard |
| Maximum Back Pressure to Tank | 4 psi | 0.3 Bar |
| Maximum Fluid Temperature | 180º F | 82º C |
| Material - Output Hub | Alloy Steel | Alloy Steel |
| Material - Housing | Aluminum | Aluminum |
| External Finish - Output Hub | Alloy Steel | Alloy Steel |
| External Finish - Housing | Anodized | Anodized |
| Wet input seal (Optional) | 30 psi | 2 bar |
| Weight (Approximate) | 63 Lbs | 29 Kg |
More from Logan Clutch
- Logan Clutch Bell Housing PTO Water Jetting Systems
- Logan Clutch CH Series Clutches
- Logan Clutch Clutches for Hybrid Drives
- Logan Clutch Clutches for Marine Applications
- Logan Clutch Direct Drive PTO Clutches for Twin Disc and ZF Marine Transmissions
- Logan Clutch Friction and Steel Clutch Discs
- Logan Clutch Front of Engine PTO Clutches for KOHLER Diesel Gensets
- Logan Clutch HPC Series Clutches
- Logan Clutch LCT Series Clutches
- Logan Clutch Logan Bell Housing PTO for Marine Applications
- Logan Clutch Marine Hybrid Drives
- Logan Clutch Mobile Hybrid Drives
Featured products
All products →
Equipment
Alpha Fixed Pitch Propellers
Alpha fixed pitch propellers for ocean-going vessels on long-haul service near the design point, as well as smaller yachts and workboats; low hub-to-propeller diameter ratio and few wearing parts.
Equipment
Cat C280-6 Marine Generator Set
Inline 6-cylinder 111 L medium-speed marine generator set, 1,720-1,820 ekW at 50/60 Hz, U.S. EPA Tier 2 and IMO II, for auxiliary and diesel-electric propulsion service.
Component
A100-M Radial
Accelleron A100-M Radial turbochargers for four-stroke medium-speed main and auxiliary engines from 500 kW to 6,000 kW, with pressure ratios up to 5.8, 68% efficiency and HFO and future-fuel capability.
Similar products