Separator Spares & Equipment Component
Compass ULTRA-SEP Bilge Water Separator
Compass ULTRA-SEP two-stage chemical-free bilge water separator with HELI-SEP coalescer and SPIR-O-LATOR membranes, under 5 ppm discharge; USCG, ABS, DNV, RMRS and MED approved; 0.5 to 10 m³/h.
Description
The Compass ULTRA-SEP is a two-stage oily water separator for ships, offshore rigs and oil terminals, combining the HELI-SEP coalescing matrix, a depth process filter and SPIR-O-LATOR membranes. It runs continuously or intermittently with automatic operation and needs no flocculants or chemicals. Separator Spares & Equipment is a Compass Water Solutions distributor and service center.
How it works
- Stage 1 (HELI-SEP): system-generated vacuum, specific gravity difference and a two-stage coalescer remove most free oil and solids; oil-sensing probes trigger automatic oil discharge using pressurized water (max 37.8 °C / 100 °F)
- Stage 2: a 5-micron cartridge filter removes trace solids, then SPIR-O-LATOR membranes reject oil and particles larger than 0.01 micron
- Concentrate is recirculated, with a small bleed back to the bilge to limit fouling
- A MEPC.107(49) certified OCM redirects water to the bilge if oil exceeds 15 ppm (or 5 ppm with optional monitor)
Key features
- IMO MEPC.107(49) approved; USCG, ABS, DNV and RMRS approvals; MED type approval
- Guaranteed under 5 ppm overboard discharge
- Skid-mounted, plug-and-play installation
- Options: 5 ppm OCM, automatic membrane cleaning, in-tank heater, duplex pretreatment filtration skids
Technical data
- US-500-C: 0.5 m³/h (2.2 GPM), 536 lb dry, 3 kW
- US-1000-C: 1.0 m³/h (4.4 GPM), 658 lb dry, 4 kW
- US-1000-G: 1.0 m³/h (4.4 GPM), 710 lb dry, 4 kW
- US-2000: 2.0 m³/h (8.8 GPM), 1380 lb dry, 8.6 kW
- US-3000: 3.0 m³/h (13.2 GPM), 1525 lb dry, 8.6 kW
- US-5000: 5.0 m³/h (22 GPM), 1902 lb dry, 8.8 kW
- US-7500: 7.5 m³/h (33 GPM), 3150 lb dry, 12.5 kW
- US-10000: 10.0 m³/h (44 GPM), 3880 lb dry, 12.5 kW
Specifications
| Model Number | Capacity m3/h (GPM) | Length (in)* | Width (in)* | Height (in)* | Weight Dry(lbs) | Power kW |
|---|---|---|---|---|---|---|
| Ultra-Sep US-500-C | 0.5 (2.2) | 35 | 30 | 40 | 536 | 3 |
| Ultra-Sep US-1000-C | 1.0 (4.4) | 40 | 35 | 61 | 658 | 4 |
| Ultra-Sep US-1000-G | 1.0 (4.4) | 45 | 35 | 63 | 710 | 4 |
| Ultra-Sep Standard US-2000 | 2.0 (8.8) | 72 | 52 | 66 | 1380 | 8.6 |
| Ultra-Sep Standard US-3000 | 3.0 (13.2) | 72 | 52 | 66 | 1525 | 8.6 |
| Ultra-Sep Standard US-5000 | 5.0 (22.0) | 104 | 56 | 74 | 1902 | 8.8 |
| Ultra-Sep Standard US-7500 | 7.5 (33.0) | 104 | 71.5 | 78.5 | 3150 | 12.5 |
| Ultra-Sep Standard US-10000 | 10.0 (44.0) | 104 | 71.5 | 78.5 | 3880 | 12.5 |
More from Separator Spares & Equipment
- Separator Spares & Equipment Ahead Sanitation Systems
- Separator Spares & Equipment Alfa Laval Brazed Heat Exchanger
- Separator Spares & Equipment Alfa Laval MAB 103 Separator
- Separator Spares & Equipment Alfa Laval Plate Heat Exchanger Service
- Separator Spares & Equipment Centrifugal Separator Service
- Separator Spares & Equipment Centrifugal Separator Spare Parts
- Separator Spares & Equipment Centrifuge Skids
- Separator Spares & Equipment Compass Water Solutions SAREX VG-SEP Oily Water Separator
- Separator Spares & Equipment EcoBrazed Brazed Plate Heat Exchangers
- Separator Spares & Equipment GEA Brazed Plate Heat Exchanger
- Separator Spares & Equipment GEA FlatPlate Plate Heat Exchangers
- Separator Spares & Equipment GEA Westfalia BilgeMaster cleandesign
Featured products
All products →
Equipment
Alpha Controllable Pitch Propellers
Alpha controllable pitch propellers for ships with varying operating modes, covering shaft powers up to 40 MW; Ni-Al-bronze or stainless steel, ice-strengthened up to the highest polar ice classes, with shafting and stern tube systems.
Component
Legacy Turbochargers – Service and Original Parts
Accelleron authorized service and original spare parts for legacy turbochargers no longer sold, including TPL-B, VTR, TPL-A, TPL-C, TPS-E and VTC, used on marine propulsion and auxiliary engines.
Equipment
Fernstrum® GRIDCOOLER® Keel Cooler
Factory-assembled 90/10 copper-nickel keel cooler with a one-piece brazed header, 56% silver-brazed joints and Fernstrum's exclusive enhanced-interior tubing — the long-established choice of naval architects for closed-circuit engine cooling.
Similar products