Mercury Racing Equipment
Mercury Racing Dual Cal 1550/1350 Sterndrive Engine
Mercury Racing 9.0 L V8 sterndrive engine with key-fob selectable calibrations: 1550 hp on 112 AKI race fuel or 1350 hp on 91 octane (98 RON), paired with the M8 drive.
Description
The Mercury Racing Dual Cal 1550/1350 is a 9.0-liter V8 sterndrive engine with an advanced control system that lets the operator switch power level with an electronic key fob. The Race fob delivers 1550 hp on 112 AKI race fuel; the Pleasure fob delivers 1350 hp on 91 octane (98 RON) fuel. Both calibrations are optimized for torque and efficiency at their power level.
Technical data
- Rated power at transom: 1550 / 1350 hp
- Full throttle rpm: 6200-6800 (1550 hp) / 6000-6500 (1350 hp)
- Displacement: 9.0 L (552 CID), V8
- Compression ratio: 7.8:1
- Fuel system: sequential fuel injection
- Alternator: 105 A
- Controller: PCM09
- Transmission: Mercury Racing dry-sump hydraulic
- Drive unit: M8; gear ratio application dependent
- Dimensions (L from back of block x W x H): 31 x 35 x 29 in
- Warranty: 10 hours at the 1550 power level (at 2000 rpm or above) or 1 year, whichever comes first
Compatible equipment
- M8 drive: short surface-piercing twin-pinion gearcase rated to 1600 lb-ft and 1600 hp, dry sump, standard active anode
- Digital Zero Effort Controls with throttle synchronization and shadow mode for up to six engines
- Sterndrive CNC Cleaver propellers, custom made to order
Specifications
| BORE & STROKE | 9.0 L/552 CID |
|---|---|
| CYLINDERS / ENGINE CONFIGURATION | V8 |
| ALTERNATOR | 105 AMP |
| FUEL REQUIREMENT | 112 AKI Required For 1550 Calibration / 91 Octane (98 RON) Minimum For 1350 HP |
| FUEL SYSTEM | Sequential Fuel Injection |
| GEAR RATIO | Application Dependent |
| WARRANTY | 10 Hour Warranty At The 1550 Power Level (At 2000 RPM Or Above) Or 1 Year, Whichever Comes First. |
| CONTROLLER | PCM09 |
| TRANSMISSION | Mercury Racinq Dry-Sump Hydraulic |
| DRIVE UNIT | M8 |
| LENGTH - FROM BACK OF BLOCK | 31 IN |
| WIDTH | 35 IN |
| HEIGHT | 29 IN |
More from Mercury Racing
- Mercury Racing 300HP 5-Blade CNC Cleaver Propeller
- Mercury Racing 5-Blade CNC Cleaver Propeller
- Mercury Racing Bravo I FS Propeller
- Mercury Racing Bravo I LT Propeller
- Mercury Racing Bravo I OC Propeller
- Mercury Racing Bravo I XC Propeller
- Mercury Racing Bravo I XS Propeller
- Mercury Racing Chopper II Propeller
- Mercury Racing Enertia Eco XP Propeller
- Mercury Racing Lab Finished Revolution 4 Propeller
- Mercury Racing Lightning E.T. Propeller
- Mercury Racing 1100 Sterndrive Engine
Featured products
All products →
Equipment
Konrad Marine 620B Stern Drive
Konrad 620B single-propeller stern drive for diesel commercial, military, medium-duty and recreational performance boats; gear ratios 1.27:1 to 1.98:1, 17.25-20 in propellers, 50° steering range.
Equipment
Cat C1.5 Marine Generator Set
Compact 3-cylinder 1.5 L naturally aspirated diesel marine genset, 10-12 ekW at 1500/1800 rpm (50/60 Hz), U.S. EPA Tier 3, available open or with sound enclosure.
Component
TPS-F
Accelleron TPS-F compact turbochargers for small medium-speed diesel and large high-speed diesel and gas engines from 400 kW to 3,300 kW, with pressure ratios up to 5.2 and VTG versions.
Similar products