Lab Finished Revolution 4 Propeller

Name: Lab Finished Revolution 4 Propeller
Brand: Mercury Racing

Lab Finished version of the Mercury Racing Revolution 4 outboard propeller with thinner blades, adding 100 to 150 rpm at WOT compared with the Pro Finished Revolution 4 XP.

Description

The Lab Finished Revolution 4 is the Lab Finish version of Mercury Racing's Revolution 4 propeller, aimed at maximum top-end speed. For some stepped vee-bottom hulls the Lab Finish improves ride and efficiency, and on multi-engine center consoles its thinner blades provide a needed gain in rpm.

Key features

Thinner blades for higher rpm at wide-open throttle
Adds 100 to 150 rpm at WOT compared with a Pro Finished Revolution 4 XP
Spools up quickly for improved acceleration

Applications

Stepped vee-bottom hulls
Multi-engine center consoles

OMEGA Reinforced Laser Plate Banks for Cargo Hold Heating

Structurally reinforced stainless laser-plate heat-exchanger banks that replace failing pipe coils in barge and tanker cargo holds — built to survive sloshing loads in part-filled tanks while heating crude oil, caustic soda and other cargoes.

Equipment

Alfa Laval

OceanGlide

Alfa Laval OceanGlide fluidic air lubrication system creates an even, controllable air layer across a ship's flat bottom to cut hull friction and propulsion power; fuel savings up to 10% reported on M/V Tharsis.

Equipment

Everllence

Everllence 35/44DF CD Dual-Fuel GenSet

Medium-speed dual-fuel GenSet with 560 kW per cylinder output and up to 85% lower methane slip than current industry standards, based on the 35/44DF CR and 32/44CR, prepared for methanol upgrade.