Formerly MAN Energy Solutions; B&W two-stroke and four-stroke engines, turbochargers, propellers, fuel systems and PrimeServ service.
Everllence Maintenance / Service Agreement Enhanced
Technical propeller and aft ship service
Everllence PrimeServ propeller repair, refurbishment and overhaul service, including on-site dismantling and fitting, 3D measurement, blade straightening and welding, hub repair and class approval.
Description
Everllence technical propeller and aft ship service covers repair, refurbishment and complete overhaul of marine propellers, under quality control procedures and with fleet-wide support from 60+ PrimeServ service centers.
Scope
- On-site dismantling and fitting
- Blade damage analysis, 3D measurement and comparison with original drawings
- Blade straightening using induction heating
- Blade tip renewal and propeller hub repairs
- Welding of extra material, blade edge welding and finish grinding
- Crack control and repair of blade and blade flange
- Class approval
More from Everllence
Equipment
Alpha Controllable Pitch Propellers
Alpha controllable pitch propellers for ships with varying operating modes, covering shaft powers up to 40 MW; Ni-Al-bronze or stainless steel, ice-strengthened up to the highest polar ice classes, with shafting and stern tube systems.
Equipment
Alpha Fixed Pitch Propellers
Alpha fixed pitch propellers for ocean-going vessels on long-haul service near the design point, as well as smaller yachts and workboats; low hub-to-propeller diameter ratio and few wearing parts.
System / Package
Alpha Naval Propellers
Alpha naval propeller and aft ship solutions in the 2 to 50 MW shaft power range: CPPs, monoblock and replaceable-blade FPPs and bolted adjustable designs, with low underwater noise, shock resistance and ice-class options.
Component
CENTA Flexible Coupling Service by Everllence PrimeServ
Authorized service for CENTA flexible couplings on four-stroke engines: periodic inspection, rubber element replacement, original spare kits, alignment checks and resilient mounting replacement.
Component
Common Rail 2.2 Injection System
Second-generation common rail liquid fuel injection platform for Everllence medium-speed four-stroke engines, replacing multiple legacy designs and forming the basis for future methanol and ammonia injection.
Equipment
Everllence 175D High-Speed Engine
V12, V16 and V20 high-speed marine diesel engine with 175 mm bore, 1,440–4,400 kW at 1,500–2,000 rpm, methanol-ready, for propulsion and gensets on naval, offshore, ferry, tug, yacht and fishing vessels.
Equipment
Everllence 175DF-M Dual-Fuel Methanol Engine
High-speed dual-fuel engine running on methanol (with pilot ignition) or diesel, based on the 175D platform; IMO Tier III without SCR in methanol mode; retrofit from 175D with over 90% shared components.
Equipment
Everllence 32/44CR Medium-Speed Engine
Updated medium-speed four-stroke marine diesel engine with Common Rail 2.2 injection, single-stage turbocharging and in-house engine control; methanol-ready and designed to support IMO 2028 compliance.
Equipment
Everllence 35/44DF CD Dual-Fuel GenSet
Medium-speed dual-fuel GenSet with 560 kW per cylinder output and up to 85% lower methane slip than current industry standards, based on the 35/44DF CR and 32/44CR, prepared for methanol upgrade.
Equipment
Everllence 49/60DF Dual-Fuel Engine
Medium-speed dual-fuel marine engine, in-line 6–10 or V12/V14 cylinders, 7,800–18,200 kW, with Common Rail 2.2 injection, two-stage turbocharging and SaCoS 5000 control, for mechanical or electric propulsion.
Equipment
Everllence Alpha GenSet
Compact marine auxiliary genset module (engine, alternator, monitoring) in 6- and 12-cylinder versions, 176–752 kWe, Tier II/Tier III, 18,000 h TBO, DNV/GL or BV class.
Equipment
Everllence B&W ME-C Two-Stroke Engine
Electronically controlled low-speed two-stroke main engine range for ocean-going merchant vessels: 4,350–82,440 kW, 35–95 cm bore, 5–12 cylinders, 56–167 rpm, with retrofit paths to dual-fuel operation.