Kobelt Equipment
KP 40 Hydraulic Bow or Stern Thruster
Kobelt Keypower KP 40 hydraulic bow or stern thruster rated 400 HP at 700 propeller RPM; hydraulic flow and pressure configured to the application; bronze or aluminum propeller.
Description
The Keypower KP 40 Hydraulic Bow or Stern Thruster from Kobelt is a hydraulically driven tunnel thruster for vessel manoeuvrability and control in difficult conditions. The Keypower line fits almost any configuration where a bow or stern thruster is required.
Technical data
- Power: 400 HP
- Propeller speed: 700 RPM
- Hydraulic flow and pressure: configured based on the application
- Propeller: bronze or aluminum
GPM and PSI figures may be lower or higher respectively in international markets.
System scope
- Thruster, drive motor, switch box and controls
- Optional thruster tubes for installation into the hull
- Optional components including an HPU for a complete system
Series
Keypower hydraulic thruster models: KP 8, KP 10, KP 12, KP 14, KP 16, KP 16HD, KP 18, KP 22, KP 26, KP 36, KP 40.
More from Kobelt
- Kobelt Manufacturing Kobelt Hydraulic Steering Systems
- Kobelt Manufacturing Kobelt Marine Steering Cylinders
- Kobelt Manufacturing Kobelt Power Assist Steering
- Kobelt Manufacturing 7168: Rudder Angle Feedback Unit
- Kobelt Manufacturing 7170: Jog Lever
- Kobelt Manufacturing 7174: Rudder Angle Feedback Unit
- Kobelt Manufacturing Accu-Steer Hydraulic Steering Manifolds
- Kobelt Manufacturing Keypower KP4500 Auxiliary Propeller Get-Home Drive
- Kobelt Manufacturing Kobelt 7002 Steering Header Tank
- Kobelt Manufacturing Kobelt 7003 Helm Pump
- Kobelt Manufacturing Kobelt 7004 Helm Pump
- Kobelt Manufacturing Kobelt 7005 Helm Pump
Featured products
All products →
System / Package
Heating and cooling for methanol
Alfa Laval heat exchangers for heating and cooling methanol fuel on board: semi-welded plate heat exchangers, AlfaNovaM all-stainless units and CBM copper-brazed units (-196°C to 225°C, 51 bar).
Equipment
OMEGA Laser Plate™
Laser-welded pillow plate (immersion plate) heat exchangers in stainless steel, duplex, nickel alloys or titanium — custom-built for cargo hold and tank heating, heat recovery and de-icing on ships and offshore units; supplied by R.W. Fernstrum with Omega Thermo Products.
Equipment
Cat C1.5 Marine Generator Set
Compact 3-cylinder 1.5 L naturally aspirated diesel marine genset, 10-12 ekW at 1500/1800 rpm (50/60 Hz), U.S. EPA Tier 3, available open or with sound enclosure.
Similar products