Kobelt Equipment
KP 16 Hydraulic Bow or Stern Thruster
Kobelt Keypower KP 16 hydraulic bow or stern thruster rated 50 HP at 1,500 propeller RPM, requiring 32 GPM at 2,600 PSI; bronze or aluminum propeller.
Description
The Keypower KP 16 Hydraulic Bow or Stern Thruster from Kobelt is a hydraulically driven tunnel thruster for vessel manoeuvrability and control in difficult conditions. The Keypower line fits almost any configuration where a bow or stern thruster is required.
Technical data
- Power: 50 HP
- Propeller speed: 1,500 RPM
- Hydraulic flow required: 32 GPM
- Hydraulic pressure required: 2,600 PSI
- Propeller: bronze or aluminum
GPM and PSI figures may be lower or higher respectively in international markets.
System scope
- Thruster, drive motor, switch box and controls
- Optional thruster tubes for installation into the hull
- Optional components including an HPU for a complete system
Series
Keypower hydraulic thruster models: KP 8, KP 10, KP 12, KP 14, KP 16, KP 16HD, KP 18, KP 22, KP 26, KP 36, KP 40.
More from Kobelt
- Kobelt Manufacturing Kobelt Hydraulic Steering Systems
- Kobelt Manufacturing Kobelt Marine Steering Cylinders
- Kobelt Manufacturing Kobelt Power Assist Steering
- Kobelt Manufacturing 7168: Rudder Angle Feedback Unit
- Kobelt Manufacturing 7170: Jog Lever
- Kobelt Manufacturing 7174: Rudder Angle Feedback Unit
- Kobelt Manufacturing Accu-Steer Hydraulic Steering Manifolds
- Kobelt Manufacturing Keypower KP4500 Auxiliary Propeller Get-Home Drive
- Kobelt Manufacturing Kobelt 7002 Steering Header Tank
- Kobelt Manufacturing Kobelt 7003 Helm Pump
- Kobelt Manufacturing Kobelt 7004 Helm Pump
- Kobelt Manufacturing Kobelt 7005 Helm Pump
Featured products
All products →
Equipment
Everllence B&W ME-C Two-Stroke Engine
Electronically controlled low-speed two-stroke main engine range for ocean-going merchant vessels: 4,350–82,440 kW, 35–95 cm bore, 5–12 cylinders, 56–167 rpm, with retrofit paths to dual-fuel operation.
Equipment
Cat C4.4 Marine Generator Set
Inline 4-cylinder 4.4 L diesel marine genset, 36-99 ekW at 1500/1800 rpm, with heat exchanger, radiator or keel cooling, open or enclosed, 12 or 24 V; class-approved packages available.
Equipment
OMEGA Laser Plate™
Laser-welded pillow plate (immersion plate) heat exchangers in stainless steel, duplex, nickel alloys or titanium — custom-built for cargo hold and tank heating, heat recovery and de-icing on ships and offshore units; supplied by R.W. Fernstrum with Omega Thermo Products.
Similar products