Glendinning Products Device / Instrument
Electronic Engine Control Systems
Glendinning Complete Controls EEC-3 and EEC-4 electronic engine control systems for electronic engines and solenoid-shifted transmissions, with sync, slow and troll modes and optional gear/throttle backup.
Description
Glendinning Complete Controls electronic engine control systems interface with electronic engines and electric (solenoid-operated) transmissions, providing control from basic to advanced operation of the propulsion system.
Basic features (all systems)
- Cruise mode – normal engine speed and transmission control
- Warm mode – transmission locked in neutral while throttle is adjusted
- Warning and alarm modes for battery voltage and system faults
- Exclusive two-button station transfer
- Sync mode – one handle controls the speed of both engines
Advanced features (EEC-3)
- Slow mode – full handle movement gives half normal full throttle speed (for no-wake areas)
- Troll mode – compatible with all brands of trolling valves (optional)
- Automatic gear/throttle backup (optional)
Further features
- Single or dual lever control; adjustable detent/friction
- "Posi-lock" gear lockout; selectable station transfer methods and station lockout
- Adjustable high idle; keypad light dimmer; dual battery inputs; audible neutral indicator
Models
- EEC-3 (troll mode capable): versions for CAT (11230-C), Detroit (11230-D), John Deere/Lugger (11230-J), MAN (11230-M), Scania (11230-S), Volvo (11230-V) and generic 11230-NEC
- EEC-4 (two-engine versions, no troll mode): Iveco, Lugger/John Deere, Pleasure Craft, Steyr, Volvo and generic 11235
Specifications
| Part Number | Model | Engine Manufacturer | Troll Mode |
|---|---|---|---|
| 11230-NEC | EEC-3 | Yes | |
| 11230-C | EEC-3 | CAT | Yes |
| 11230-D | EEC-3 | Detroit | Yes |
| 11230-J | EEC-3 | John Deere/Lugger | Yes |
| 11230-M | EEC-3 | MAN | Yes |
| 11230-S | EEC-3 | Scania | Yes |
| 11230-V | EEC-3 | Volvo | Yes |
| 11235 | EEC-4 | No | |
| 11235-IV | EEC-4 | Iveco (2 engines) | No |
| 11235-L | EEC-4 | Lugger/John Deere (2 engines) | No |
| 11235-PC | EEC-4 | Pleasure Craft (2 engines) | No |
| 11235-ST | EEC-4 | Steyr (2 engines) | No |
| 11235-V2 | EEC-4 | Volvo (2 engines) | No |
More from Glendinning Products
- Glendinning Marine Electric Propulsion Controls
- Glendinning Marine Mechanical Engine Control Systems
- Glendinning Marine ProPilot Joystick Control System
- Glendinning Marine ProPilot-S Joystick Control System for Sailboats
- Glendinning Marine ProPosition Dynamic Positioning System
- Glendinning Marine Smart Actuator 1
- Glendinning Marine Smart Actuator 2
- Glendinning Marine Smart Actuator 4
- Glendinning Marine Waterjet Propulsion Controls
Featured products
All products →
Equipment
Alpha Fixed Pitch Propellers
Alpha fixed pitch propellers for ocean-going vessels on long-haul service near the design point, as well as smaller yachts and workboats; low hub-to-propeller diameter ratio and few wearing parts.
Equipment
Cat C280-16 Marine Generator Set
Cat C280-16 V16 four-stroke diesel marine generator set rated 4700–4840 ekW (5875–6050 kVA), 1000 rpm at 50 Hz or 900 rpm at 60 Hz, EPA Tier 2 / IMO II.
System / Package
Alfa Laval Equipment for LNG as Marine Fuel
Alfa Laval equipment for LNG-fuelled ships: FCM LNG high-pressure fuel supply system with cryogenic pumps and PCHE heat exchangers, fuel-flexible Aalborg boilers handling BOG, and Gas Combustion Unit for LNG carriers.
Similar products