General Propeller Component
Tides seriesOne Shaft Seal Kits
Tides Marine seriesOne shaft seal for smaller single-engine vessels with stainless steel propeller shafts.
Description
The Tides seriesOne shaft seal was designed for smaller single-engine vessels with stainless steel propeller shafts. The housing is produced like the SureSeal seals but with a modified front cap, so the lip seal is not replaceable and the whole seal must be replaced when worn.
Key features
- Shaft diameters from 7/8 inch through 1-1/4 inch in 1/8 inch increments, and metric shafting from 25mm through 30mm
- PTFE machined bearing
- Single-convolution articulating hose option for ski boats with shorter shafts and higher operating RPM (3500 RPM+)
- Multi-convolution articulating hose option for smaller diesel engines (1-3 cylinders) on softer mounts
- Four 316 stainless steel clamps included; one year warranty
Specifications
| Shaft sizes | 7/8" to 1-1/4"; M25 to M30 |
|---|---|
| Stern tube outside dia. | 1.750" - 3.000" and 45mm - 76mm |
| Bearing | PTFE |
| Warranty | one year |
More from General Propeller
- Volvo Penta Folding Propellers
- Volvo Penta Fixed Saildrive Propellers
- Michigan Marine Propulsion MMP Aftermarket Saildrive Propellers
- Michigan Wheel Sailor 2 Propellers
- Michigan Wheel 3 Blade DJ355 Propellers
- Volvo Penta SX Drive Propellers
- Teignbridge 3 Blade Nibral 17 x 19 1.50" Bore LH AC55
- Mercury Fury 48-8M8023090 Propeller
- Mercury Fury 48-8M8023100 Propeller
- General Propeller Mercury Trophy Sport Stainless Propellers
- General Propeller Michigan Wheel DQ469 4-Blade Inboard Propeller
- General Propeller Powertech D-S 3-Blade Suzuki V4 Aluminum Propellers
Featured products
All products →
System / Package
OMEGA Reinforced Laser Plate Banks for Cargo Hold Heating
Structurally reinforced stainless laser-plate heat-exchanger banks that replace failing pipe coils in barge and tanker cargo holds — built to survive sloshing loads in part-filled tanks while heating crude oil, caustic soda and other cargoes.
Equipment
Cat C280-6 Marine Generator Set
Inline 6-cylinder 111 L medium-speed marine generator set, 1,720-1,820 ekW at 50/60 Hz, U.S. EPA Tier 2 and IMO II, for auxiliary and diesel-electric propulsion service.
System / Package
Heating and cooling for methanol
Alfa Laval heat exchangers for heating and cooling methanol fuel on board: semi-welded plate heat exchangers, AlfaNovaM all-stainless units and CBM copper-brazed units (-196°C to 225°C, 51 bar).
Similar products