DC PowerCube 48 VDC - 80 A

Name: DC PowerCube 48 VDC - 80 A
Brand: WhisperPower

Model 60202003

48 VDC heavy-duty battery charger/power supply, up to 4.3 kW, with dual input from shore power (90–264 VAC) and Genverter PM generator, plus 12 V/20 A slave output.

Description

The WhisperPower DC PowerCube 48 VDC – 80 A (part number 60202003) is a heavy-duty battery charger and power supply for large DC systems with big battery banks and significant DC consumption on marine and mobile/off-grid installations. It converts grid or generator power to ripple-free DC for lighting, electronics, pumps and other loads, and can operate as a power supply without batteries.

Key features

Up to 3.5 kW from shore power and up to 4.3 kW from a Genverter© PM generator
Dual input: AC grid supplemented by Genverter© input with adjustable load and rpm
Adjustable AC input current (2–16 A) to match any shore supply
3+ step charging for AGM, gel, open/sealed lead-acid, traction and lithium-ion batteries; selectable via laptop or dipswitch
12 VDC / 20 A 3-step slave output
WhisperConnect CAN-bus for central monitoring; standard analogue panel supplied
Relay outputs for status and failure; inputs to disable grid or PM input

Technical data

Nominal battery voltage: 48 VDC; output current 0–100 A (short-circuit protected)
Recommended battery capacity: 200–1000 Ah
Grid input: 90–264 VAC, 45–65 Hz; PM generator input: 80–300 VAC, 30–500 Hz
Power factor: >0.85
Protection: IP21; derating above 40 °C; overvoltage protection 68 VDC
Dimensions: 268 × 316 × 575 mm; weight 26 kg

Specifications

60202003	DC PowerCube 48 V - 80 A
Weight kg (lb.)	26 (57.3)
Length x width x height, mm (in.)	268 x 316 x 575 (10.6 x 12.4 x 22.6)
Nominal battery voltage	48 VDC
Output current	0 - 100 A (short circuit protected)
Output voltage	43.0 / 57.0 VDC
Recommended battery capacity:	200 to 1000 Ah
charge characteristic	3+ step charge characteristic
Slave charger	12 V - 20 A (3+ step charge characteristic) short circuit protected
Grid input voltage range	90 - 264 VAC (45 - 65 Hz), (3 wire connection)
Grid input current	Adjustable, from 2 A to 16 A
PM generator input range	80 - 300 VAC (30 - 500 Hz), (3 wire connection)
PM input current	Adjustable, from 2 A to 14.5 A
Power factor (cos phi)	> 0.85
Power Factor Correction (PFC)	EN 61000-3-2
Temperature compensation	-60 mV / °C
Supported battery types	Open and sealed lead acid: Gel / Traction / AGM / Spiral and Lithium-ion
Battery leakage current	<5 mA per battery
Charge voltages	Bulk, Absorption, Float
Charge voltage AGM / GEL at 25°C	57.60 VDC, 57.00 VDC, 54.40 VDC
Charge voltage Traction at 25°C	58.40 VDC, 57.80 VDC, 53.00 VDC
Charge voltage Open lead acid at 25°C	57.00 VDC, 57.00 VDC, 53.00 VDC
Charge voltage Lithium ION at 25°C	57.60 VDC, 54.40 VDC, 53.00 VDC
Return current from absorption to float	6% of Imax
PowerCube status on/off	Digital output (relay, two-way contact)
Failure	Digital output (relay, two-way contact)
AC grid disabled	Digital input (potential free input, closed is disabled)
PM input disabled	Digital input (potential free input, closed is disabled)
Conformity	Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,EN 61000-3-2, 62040-2 Low voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1
PM input isolation protection	Yes (open collector output 30 VDC, 100 mA)
Over temperature protection	Yes, derating above 40°C, shutdown at high temperatures. (with automatic restart after cooling down)
Overvoltage protection (manual restart needed)	68 VDC +/- 0.5 VDC
Ingress Protection index	IP21
Main battery connection	2 x M10 studs
Slave battery connection	1 x M5 stud
Earth grounding lug	1 x M6 stud
AC grid input	3 x M3 screw terminal block
PM grid input	3 x M3 screw terminal block
Remote control panel	RJ12
Battery temperature sensor	RJ12
Whisper Connect CANbus	RJ45
Voltage sense	Phoenix MSTB 2.5 / 2-ST-5.08
Digital outputs	6 x fastons (6.3 x 0.8)
Digital inputs	4 x fastons (6.3 x 0.8)
Operating temperature range	-20 - 55°C (derating above 40°C)
Relative humidity in operation	up to 95% without condensation
Ventilation	Combined cooling (convection and forced (variable speed))
Acoustic level	<52 dB
Warranty	2 years
Accessories	Battery temperature sensor and remote control panel

Konrad Stern Drive Product Line (500, 600 and 600B Series)

Konrad Marine 500, 600 and 600B series stern drives for working and high-speed boats: models 520, 540, 560, 620, 660, 680, 620B, 660B and 680B.

Equipment

Everllence

Everllence B&W ME-GI Dual-Fuel Engine

Low-speed two-stroke dual-fuel engine running on LNG/methane or fuel oil using the diesel cycle, with methane slip of +/-0.2 g/kWh, for LNG carriers, container ships, tankers, PCTCs and bulk carriers.

Component

Accelleron

ACCX300-L

Accelleron ACCX300-L next-generation low-speed turbochargers for two-stroke main engines: compact, higher power density, modular platform design with flexible cartridge-based service and data-enabled services.