HIDEA - HDF13.5HL
Model: HDF13.5HLBrand: HIDEA
Product Specification Listing for Marine Engine: HIDEA - HDF13.5HL
General Information:
- Brand: HIDEA
- Model: HDF13.5HL
- Engine Type: 4-stroke outboard motor
Performance Specifications:
- Horsepower: 13.5 HP
- RPM Range: 5,000 - 6,000 RPM
- Ignition System: CDI (Capacitor Discharge Ignition)
Physical Dimensions:
- Weight: Approximately 39 kg (86 lbs)
- Overall Length: TBD
- Overall Width: TBD
- Overall Height: TBD
- Transom Height: 20 inches (Long Shaft)
Engine Details:
- Displacement: 362 cm³
- Bore x Stroke: TBD
- Cylinder Configuration: Inline 2-cylinder
- Fuel Delivery System: Carburetor
- Cooling System: Water-cooled with thermostat
- Lubrication System: Wet sump
- Starting System: Manual and Electric options
- Steering System: Tiller or remote
Fuel & Lubrication:
- Fuel Type: Unleaded gasoline
- Fuel Tank Capacity: Portable fuel tank (standard) - 12 liters (3.17 gallons)
- Engine Oil Capacity: 0.8 liters (0.21 gallons)
- Gear Ratio: 2.08:1
Features:
- Trim & Tilt: Manual tilt
- Gear Shift: F-N-R (Forward-Neutral-Reverse)
- Alternator Output: 12V 6A (short shaft only)
- Exhaust System: Through propeller
- Propeller: Aluminum, standard with the option for various pitches
Compliance & Safety:
- Emission Standards: EPA approved (check for specific local compliance)
- Safety Features: Overheat protection, over-rev limiter
- Noise Level: Compliant with international standards
Warranty:
- Standard Warranty: 3-year limited warranty (terms and conditions apply)
- Extended Warranty: Available upon request (if offered)
Included Accessories:
- Standard Tool Kit
- Owner’s Manual
- 12-liter fuel tank with fuel line
Optional Accessories:
- Remote Control Kit
- Additional Propellers
- Hydrofoils for increased performance
- Engine Cover
User Recommendations:
- Recommended Boat Types: Small fishing boats, RIBs, dinghies
- Maintenance Tips: Regular oil changes, flushing with fresh water after use in saltwater, periodic inspection of spark plugs, fuel lines, and impeller
Disclaimer: Specifications are subject to change without notice. For the latest information, please refer to the manufacturer's website or contact an authorized HIDEA dealer.
Product Specifications
Width
795 mm
(31.30in)
Weight
55 kg
(121.25lbs)
Stroke
59 mm
(2.32in)
Rated Speed
4500 r/min
Powerkw
9.9 kW
Length
1307 mm
(51.46in)
Height
550 mm
(21.65in)
Displacement
323 cm3
(0.32L, 19.71in3)
Cylinders Arrangement/Number
2
Compression Rate
9.9:1
Bore
59 mm
(2.32in)