Description
Product Specification Listing: Lister ST1 Marine Engine
General Information
Model Name: Lister ST1 Marine Engine
Manufacturer: Lister Petter Limited
Engine Specifications
- Engine Type: Single-cylinder, 4-stroke, naturally aspirated diesel engine
- Displacement: 490 cm³ (29.9 in³)
- Bore x Stroke: 95.25 mm x 88.9 mm (3.75 in x 3.5 in)
- Compression Ratio: 17.5:1
- Power Output:
- Maximum Power: 8.1 kW (10.9 HP) @ 3000 RPM
- Continuous Power: 7.0 kW (9.4 HP) @ 3000 RPM
- Torque Output: Data not explicitly specified; consult technical documentation
Fuel System
- Fuel Type: Diesel
- Fuel Consumption: Approximately 280 g/kWh @ full load
- Dependent on operating conditions and maintenance
- Fuel Tank Capacity: Not specified; typically depends on installation configuration
Cooling System
- Type: Water-cooled
- May include options for raw water cooling or keel cooling suitable for marine applications
Lubrication System
- Type: Forced lubrication
- Oil Capacity: 2.4 liters (2.53 quarts)
- Oil Type: API-CC or higher grade SAE 10W30 or 15W40
Electrical System
- Starting System: Electric start (optional manual start)
- Alternator: 12 V DC, typically 40 A, subject to customization
- Battery Capacity: As recommended for the starting system and auxiliary requirements
Dimensions and Weight
- Length: 620 mm (24.4 in)
- Width: 371 mm (14.6 in)
- Height: 637 mm (25.1 in)
- Dry Weight: Approximately 165 kg (364 lbs)
Exhaust System
- Exhaust Outlet: 1.5 in (38.1 mm) diameter
- Exhaust Emissions: Compliant with marine emissions standards as applicable
Optional Features
- Silent Pack: Optional acoustic enclosures for noise reduction
- Heat Exchanger: For efficient cooling in marine environments
- Hydraulic Pump: Optional auxiliary drive for hydraulic applications
Maintenance and Service
- Service Interval: Regular maintenance typically every 250 hours or annually
- Maintenance Requirements:
- Oil and filter changes
- Fuel filter replacement
- Cooling system checks
- Fuel system bleeding and purging
- Parts and Support: Available from Lister Petter authorized dealers
Installation Requirements
- Mounting Options: Flexible isolator mounts for vibration reduction
- Alignment: Precision alignment required for coupling with propeller shaft
- Installation Manual: Provided by Lister Petter
Warranty
- Standard Warranty: Typically 1 year or 1000 operational hours
- Extended Warranty: Options available upon request
Compliance and Certification
- Certifications: Compliance with relevant marine safety and emissions standards
- Emissions: Tier II / III compliant, depending on specific configuration
Use Cases
- Applicable Vessels: Fishing boats, small workboats, leisure yachts, and other small marine craft
Contact Information
- Customer Service: Lister Petter Limited
- Support Hotline: Provided on the official website
- Website: www.listerpetter.com
For further technical details or specific application queries, please refer to the official Lister Petter technical documentation or contact authorized support personnel.