Compare

MTU 16V-956-TB92 5257 HP

Model: 16V-956-TB92

Brand: MTU

Product Specification Listing: Marine Engine MTU 16V-956-TB92 5257 HP

General Information:

Manufacturer: MTU
Model: 16V-956-TB92
Application: Marine
Engine Configuration: V16

Performance Specifications:

Power Output: 5257 HP (Horsepower)
Rated Speed: Variable, refer to specific duty cycle requirements (typically around 1500 - 1800 RPM)

Engine Design Details:

Cylinder Bore: Specific measurement needed (commonly used measurements can be 170-200 mm range)
Piston Stroke: Specific measurement needed (typically within the range of 180-230 mm)
Engine Displacement:
- Exact engine displacement should be consulted from MTU detailed datasheets for cubic inches/liters.

Fuel System:

Fuel Type: Diesel
Fuel Injection System: Common Rail Diesel System or Unit Pump System (specific system to be identified from detailed spec)
Fuel Consumption: Specific figure required for given power output and duty cycle

Cooling System:

Type: Closed-Circuit Cooling with Sea Water Heat Exchanger
Coolant: Water-Glycol Mixture

Lubrication System:

Type: Forced Circulation
Oil Capacity: Consult MTU for specific oil capacity in liters

Intake and Exhaust System:

Turbocharging: Yes
Aftercooling: Air-to-Water Intercooler

Dimensions and Weight:

Length: Consult specific design manuals (approx. ranges around 4-5 meters)
Width: Typically around 1.5-2 meters
Height: Around 2-2.5 meters
Dry Weight: Approximately 20,000-26,000 kg (depending on configuration and accessories)

Electrical System:

Starter Type: Electric starting motor
Alternator: 24V/50A or specified according to requirements

Emissions and Environmental Compliance:

Emissions: Compliant with IMO, EPA, or other relevant marine emissions standards (detailed compliance data from MTU)

Additional Features:

Engine Control System: MTU Electronic Engine Control for optimized performance and diagnostics
Monitoring: Real-time engine performance monitoring and diagnostics interface

Maintenance Intervals:

Routine Service: Every 500 hours or 1 year (whichever comes first)
Major Overhaul: Approximately every 15,000 hours or 5 years (whichever comes first)
Oil Change: Every 500 hours or as per the condition specified by oil analysis

Warranty:

Standard Warranty: Typically 1-2 years, extended warranties available (consult MTU for specific warranty terms)

Please note that this product specification is a general guide and users should consult the manufacturer’s technical datasheet and service guide for detailed and model-specific information.

[Product Type: Engine]