Description
Sure, here's a detailed product specification listing for the PHASOR MARINE P4-49-03 49.5HP marine engine:
Product Specification Listing: PHASOR MARINE P4-49-03 49.5HP Marine Engine
General Information:
- Manufacturer: Phasor Marine
- Model Number: P4-49-03
- Type: Marine Diesel Engine
- Power: 49.5 Horsepower
Engine Specifications:
- Engine Type: Four-cylinder, four-stroke, inline diesel engine
- Displacement: 2.43 liters
- Aspiration: Naturally aspirated
- Bore x Stroke: Typically around 87 mm x 92 mm (varies, confirm exact dimensions with manufacturer spec sheet)
- Compression Ratio: 22:1
Performance:
- Rated Power: 49.5 HP at 2800 RPM
- Torque: Approximately 150 Nm (Newton-meters) at 2000 RPM
- Max RPM: 3200 RPM
Fuel System:
- Fuel Type: Diesel
- Fuel Consumption: Approx. 1.8 gallons/hour (@75% load, values might vary)
- Fuel Injection System: Direct injection
- Fuel Tank Capacity: Varies, dependent on boat installation but typically around 20-50 gallons.
Cooling System:
- Type: Freshwater cooling system with heat exchanger
- Cooling Capacity: Around 7 liters (exact value can vary)
Lubrication System:
- Oil Capacity: 6.5 liters
- Type: Wet sump system
- Oil Pressure: 3-5 bar (43-72 psi)
Electrical System:
- Voltage: 12 Volts
- Starter Motor: 12V electric start
- Alternator Output: 65 Amps
- Battery Capacity: Recommended at least 90 Ah
Exhaust System:
- Exhaust Configuration: Wet exhaust
- Noise Level: Approximately 85 dB(A) at full load (varies with installation efficiency)
Dimensions and Weight:
- Overall Length: 810 mm
- Overall Width: 510 mm
- Overall Height: 680 mm
- Dry Weight: Approx. 250 kg
Transmission and Propulsion:
- Gearbox Type: Mechanical or hydraulic (options available)
- Gear Ratio: 2:1 (commonly used, confirm with manufacturer for specific configuration)
- Shaft Output: Direct drive
Compliance and Standards:
- Certifications: Meets EPA Tier 2 or Tier 3 standards depending on the production year
- Other Standards: Compliance with international marine emission regulations
Accessories and Optional Features:
- Instrument Panel: Standard marine engine instrument panel with tachometer, oil pressure gauge, temperature gauge, and alarm indicators
- Additional Options: Remote control, additional alternator, gearbox cooler, flexible engine mounts, and more.
Warranty and Service:
- Warranty: Typically 2-year limited warranty (confirm specifics as this can vary)
- Service Intervals: Every 250 hours or once per year, whichever comes first
Included Documentation:
- Owner’s Manual
- Installation Guide
- Warranty Information
Application:
- Suitable for a wide range of marine applications including but not limited to sailboats, yachts, small fishing vessels, and auxiliary power for larger ships.
Contact Information:
- Phasor Marine Customer Support: [Phone Number]
- Website: [PhasorMarineWebsite.com]
Please note that the above information is a general guideline and some values might differ slightly based on specific production batches or updates to the product line. Always refer to the official manufacturer documentation for the most accurate and up-to-date information.
