Description
Product Specification Listing: Marine Engine MTU 16V-956-TB92 5257 HP
General Information:
- Manufacturer: MTU
- Model: 16V-956-TB92
- Application: Marine
- Engine Configuration: V16
Performance Specifications:
- Power Output: 5257 HP (Horsepower)
- Rated Speed: Variable, refer to specific duty cycle requirements (typically around 1500 - 1800 RPM)
Engine Design Details:
- Cylinder Bore: Specific measurement needed (commonly used measurements can be 170-200 mm range)
- Piston Stroke: Specific measurement needed (typically within the range of 180-230 mm)
- Engine Displacement:
- Exact engine displacement should be consulted from MTU detailed datasheets for cubic inches/liters.
Fuel System:
- Fuel Type: Diesel
- Fuel Injection System: Common Rail Diesel System or Unit Pump System (specific system to be identified from detailed spec)
- Fuel Consumption: Specific figure required for given power output and duty cycle
Cooling System:
- Type: Closed-Circuit Cooling with Sea Water Heat Exchanger
- Coolant: Water-Glycol Mixture
Lubrication System:
- Type: Forced Circulation
- Oil Capacity: Consult MTU for specific oil capacity in liters
Intake and Exhaust System:
- Turbocharging: Yes
- Aftercooling: Air-to-Water Intercooler
Dimensions and Weight:
- Length: Consult specific design manuals (approx. ranges around 4-5 meters)
- Width: Typically around 1.5-2 meters
- Height: Around 2-2.5 meters
- Dry Weight: Approximately 20,000-26,000 kg (depending on configuration and accessories)
Electrical System:
- Starter Type: Electric starting motor
- Alternator: 24V/50A or specified according to requirements
Emissions and Environmental Compliance:
- Emissions: Compliant with IMO, EPA, or other relevant marine emissions standards (detailed compliance data from MTU)
Additional Features:
- Engine Control System: MTU Electronic Engine Control for optimized performance and diagnostics
- Monitoring: Real-time engine performance monitoring and diagnostics interface
Maintenance Intervals:
- Routine Service: Every 500 hours or 1 year (whichever comes first)
- Major Overhaul: Approximately every 15,000 hours or 5 years (whichever comes first)
- Oil Change: Every 500 hours or as per the condition specified by oil analysis
Warranty:
- Standard Warranty: Typically 1-2 years, extended warranties available (consult MTU for specific warranty terms)
Please note that this product specification is a general guide and users should consult the manufacturer’s technical datasheet and service guide for detailed and model-specific information.