Saturday, November 23, 2024

MERCURY 65 HP 2-STROKE JET 65 HP

Model: JET 65 2S

Brand: MERCURY

Product Specification Listing

Marine Engine: MERCURY 65 HP 2-STROKE JET

General Information

  • Brand: Mercury
  • Model: 65 HP 2-Stroke Jet
  • Engine Type: Outboard Jet Drive
  • Horsepower: 65 HP
  • Configuration: 2-Stroke, 3-cylinder inline

Technical Specifications

Engine

  • Displacement: Approximately 967 cc (59 cubic inches)
  • Bore x Stroke: 76 mm x 76 mm (3.0 in x 3.0 in)
  • Ignition System: CDM (Capacitor Discharge Module)
  • Cooling System: Water-cooled with thermostat & pressure-controlled
  • Fuel System: Carbureted
  • Fuel Type: Unleaded gasoline recommended, with a minimum octane rating of 87
  • Lubrication System: Pre-mix oil injection or Direct Injection

Performance

  • Max RPM Range: 5000-5500 RPM
  • Starting System: Manual or Electric Start options available

Dimensions & Weight

  • Dry Weight: Approximately 395 lbs (179 kg)
  • Overall Length: Varies by model and setup
  • Overall Width: Varies by model and setup

Propulsion System

  • Jet Drive: Integrated jet propulsion system for shallow water operation
  • Steering: Remote steering system

Features

  • Corrosion Protection: Mercury's exclusive multi-step painting process for protection against saltwater and corrosion
  • Trim & Tilt: Power tilt and trim system
  • Bearing & Gears: Hardened gears and bearings for increased durability
  • Exhaust System: Through-prop exhaust for quieter operation
  • Propeller: None (jet drive)

Electrical & Electronics

  • Alternator Output: 10 Amp / 126 Watts
  • Battery: 12V marine battery required (verify starting requirements)

Additional Equipment

  • Controls: Optional Mercury remote control systems for throttle and shift
  • Tiller Handle: Optional tiller handle available for some models

Compliance & Safety

  • Emissions: Meets U.S. EPA emission standards
  • Certifications: Complies with relevant boating safety standards and regulations

Notes & Recommendations

  • Maintenance: Regular maintenance as per user manual for optimal performance and longevity
  • Warranty: Standard Mercury limited warranty (details as per current Mercury warranty policy)

Optional Accessories

  • Fuel Tank: External fuel tanks (varied sizes)
  • Control Cables: Mercury-certified control cables
  • Flush Kits: Optional fresh water flush kit

Applications

  • Ideal for:
    • Shallow water navigation
    • Fishing boats
    • Rescue boats
    • Utility boats
    • Recreational and adventure boats

Contact Information

  • Dealer: Authorized Mercury Marine Dealers
  • Support: Mercury Marine Customer Support

For more information, check out Mercury Marine official website or contact your local authorized Mercury dealer.


Note: Specifications are subject to change without notice, please refer to official Mercury documentation and dealer for the most accurate and recent information.

[Product Type: Engine]

Product Specifications

Outboard Outboard
Engine Type 65 HP 2-STROKE JET
Steering Remote
Lubrication Single point variable ratio
Fuelinduction Loop charged
Trim Power Trim
Starter Electric
Ignition Modular CDI
Alternator 18 amp/254 watt
Gears F N R
Shaftlength 20 or 27/508 or 686(in/mm)
Rated Speed 5000 r/min
Displacement 1386 cm3 (1.39L, 84.58in3)
Cylinders Arrangement/Number 3
Cooling Water cooled w/thermostat
Weight 143 kg (315.26lbs)
Stroke 75 mm (2.95in)
Bore 89 mm (3.50in)
Power 65 HP (48.46kw)

Competitor Products

honda60-1.jpg

Model: BF(P)60

Brand: Honda

Cylinders Arrangement/Number 3
Power 60 HP
Rated Speed 5000 r/min

Model: 4JH-DTE

Brand: Yanmar

Power 77 HP

yamaha70t-1.jpeg

Model: 70HP

Brand: Yamaha

Cylinders Arrangement/Number 3
Power 70 HP
Rated Speed 5000 r/min

Model: 22372

Brand: FORD

Power 60.3 HP

evinrude55mul-1.jpg

Model: E55M

Brand: Evinrude

Cylinders Arrangement/Number 2
Power 55 HP
Rated Speed 5500 r/min

Model: TMD22

Brand: Volvo Penta

Power 76.9 HP

Model: 3034-NA

Brand: Caterpillar

Cylinders Arrangement/Number L4
Power 63 HP
Rated Speed 2600 r/min