EVINRUDE 30 HP E-TEC 30 HP
Model: E30DBrand: Evinrude
Sure! Here's a detailed product specification listing for the Evinrude 30 HP E-TEC Marine Engine:
Evinrude 30 HP E-TEC Outboard Motor
General Specifications:
- Model: Evinrude 30 HP E-TEC
- Horsepower: 30 HP
- Engine Type: Inline 2-Cylinder E-TEC Direct Injection
- Displacement: 578 cc (35.3 cubic inches)
- Bore x Stroke: 3.00 in x 2.35 in (76 mm x 60 mm)
- Starting System: Manual start or Electric start options available
- Fuel Type: Unleaded gasoline
- Lubrication: Multi-Point Targeted Oiling
- Operational Range: 5,000 - 6,000 RPM
Dimensions and Weight:
- Shaft Lengths Available: 15 inches (Short), 20 inches (Long)
- Dry Weight:
- Short Shaft: Approximately 155 lbs (70.3 kg)
- Long Shaft: Approximately 165 lbs (74.8 kg)
Performance and Efficiency:
- Fuel System: Evinrude E-TEC (Direct Injection)
- Fuel Tank Capacity: External tank (varies by setup)
- Ignition System: Direct Injection with CDI (Capacitor Discharge Ignition) module
- Engine Management: EMM (Engine Management Module)
- Steering: Tiller control; remote steering optional
- Trim and Tilt: Power trim and tilt available; manual tilt on some models
Environmental Specifications:
- Emission Compliance: Meets all EPA (Environmental Protection Agency) and CARB (California Air Resources Board) 3-Star requirements
- Exhaust System: Through propeller
- Noise Level: Reduced noise design, featuring a tuned intake and calibrated exhaust system for quieter operation
Additional Features:
- Corrosion Resistance: Stainless steel components and anti-corrosion protection
- Maintenance: Self-Winterizing Function, No regular oil changes required for 3 years, minimal scheduled maintenance
- Gear Ratio: 2.15:1
- Propeller Options: Choice of propellers available to match specific applications and performance needs
- Warranty: Up to 5 years limited warranty (varies by region)
Accessories and Options:
- Instruments and Gauges: Optional digital engine monitoring systems
- Controls: Remote control kits available
- Propulsion: Suitable for a variety of boats including fishing boats, pontoons, and small cruisers
- Color Options: Available in various colors depending on the region and distributor
Safety and Compliance:
- Overheat Protection: Integrated system to prevent engine overheating
- Emergency Stop System: Lanyard or key switch
- Fail-Safe System: EMM regulates engine operation to prevent damage in case of failure
Manufacturer Information:
- Brand: Evinrude
- Parent Company: BRP (Bombardier Recreational Products)
- Website: www.evinrude.com
This specification listing encapsulates the key features and technical details for the Evinrude 30 HP E-TEC Marine Engine. For any further information or specific inquiries, it's advised to get in touch with an authorized Evinrude dealer.
Product Specifications
Outboard
Outboard
Engine Type
30 HP E-TEC
Steering
Remote or Accessory Tiller
Lubrication
Multi-point, targeted oiling
Fuelinduction
E-TEC Direct Fuel Injection w/stratified low RPM combustion mode
Trim
Manual or Power Tilt and Trim
Exhaust
Through prop
Starter
Rope and Electric (optional)
Ignition
IDI Fast Rise Inductive Ignition
Alternator
56 Amps Total Output / 15 Amps Net Dedicated
Gears
F N R
Shaftlength
15 or 20/381 or 508(in/mm)
Gear Ratio
2.15:1
Rated Speed
5000 r/min
Displacement
578 cm3
(0.58L, 35.27in3)
Cylinders Arrangement/Number
2
Cooling
Pressure and Temperature Controlled Water Cooled
Weight
66 kg
(145.51lbs)
Stroke
64 mm
(2.52in)
Bore
76 mm
(2.99in)
Power
30 HP
(22.37kw)