EVINRUDE 60 HP E-TEC 60 HP
Model: E60DBrand: Evinrude
Product Specification Listing: Evinrude 60 HP E-TEC Outboard Motor
General Information
- Brand: Evinrude
- Model: E-TEC 60 HP
- Engine Type: 2-Stroke Direct Injection
- Horsepower: 60 HP
Engine Specifications
- Engine Displacement: 864 cc (52.7 cu in)
- Cylinders: 2
- Bore x Stroke: 91 mm x 66 mm (3.58 in x 2.60 in)
- Fuel Induction System: E-TEC Direct Injection
- Starting System: Electric
- Ignition System: Computer Controlled
- Lubrication: Multi-Point Targeted Oiling
Performance
- Full Throttle RPM Range: 5,000 - 5,500 RPM
- Gear Ratio: 2.67:1
- Steering: Remote, Tiller
Dimensions and Weight
- Shaft Length Options:
- 15 inches (Short)
- 20 inches (Long)
- Weight: Approx. 240 lbs (109 kg)
Fuel and Oil
- Fuel Type: Gasoline
- Fuel Tank Capacity: Remote (External Tank Required)
- Oil Type: Evinrude XD100 oil (synthetic blend recommended)
Control and Mounting
- Controls: Remote or Tiller options available
- Mounting: Outboard, transom-mounted
- Trim and Tilt Options:
- Manual Trim and Tilt
- Power Trim and Tilt
Environmental and Compliance
- Emission Standards: EPA and CARB 3-Star Compliant
- Noise Reduction Features: Low decibel output for quieter operation
Features and Benefits
- Fuel Efficiency: Superior fuel efficiency with E-TEC technology
- Maintenance: No scheduled dealer maintenance for 3 years or 300 hours
- Corrosion Resistance: Enhanced with stainless steel components and multiple layers of anti-corrosive coating
- Ease of Use: Simplified starting and operating with an intuitive interface
Additional Features
- Digital Instruments: Optional digital display for engine monitoring
- Diagnostic Capability: On-board diagnostics for easy troubleshooting
- Warranty: 3-year limited warranty (conditions apply)
Recommended Applications
- Boating Types: Ideal for fishing boats, pontoons, and small workboats
- Water Conditions: Suitable for both freshwater and saltwater use with proper maintenance
Optional Accessories
- Propellers: A variety of pitch and material options available
- Rigging Kits: Complete rigging kits for ease of installation
- Dual Battery Kit: For extended use and reliability
Packaging and Shipping
- Packaging: Sturdy crate packaging for secure transport
- Shipping Weight: Varies based on crate; approximately 265 lbs
Dealer Information
- Availability: Contact local Evinrude dealers for availability and installation services
- Support: Extensive dealer network for service and support
Contact Information
- Website: www.evinrude.com
- Customer Service Hotline: 1-800-344-4355
Notes
- Specifications are subject to change without notice. Please verify with the manufacturer or an authorized dealer for the most current information and potential customizations based on specific needs.
This specification sheet is designed to give a comprehensive overview of the Evinrude 60 HP E-TEC model, providing essential information for potential buyers and users.
Product Specifications
Outboard
Outboard
Engine Type
60 HP E-TEC
Steering
Remote or Accessory Tiller
Lubrication
Multi-point, targeted oiling
Fuelinduction
E-TEC Direct Fuel Injection w/stratified low RPM combustion mode
Trim
FasTrak Power Trim and Tilt
Exhaust
Through prop
Starter
Electric
Ignition
IDI Fast Rise Inductive Ignition
Alternator
81 Amps Total Output / 25 Amps Net Dedicated
Gears
F N R
Shaftlength
20/508(in/mm)
Gear Ratio
2.67:1
Rated Speed
5500 r/min
Displacement
864 cm3
(0.86L, 52.72in3)
Cylinders Arrangement/Number
2
Cooling
Pressure and Temperature Controlled Water Cooled
Weight
109 kg
(240.30lbs)
Stroke
66 mm
(2.60in)
Bore
91 mm
(3.58in)
Power
60 HP
(44.74kw)