YAMAHA 250 HP 4-STROKE 250 HP
Model: F250ABrand: Yamaha
Certainly! Below is a product specification listing for the Yamaha 250 HP 4-Stroke Marine Engine:
Product Specification Listing
Yamaha 250 HP 4-Stroke Outboard Motor
Model Name: Yamaha F250
Engine Type:
- 4-Stroke, V6, 24-Valve, DOHC (Double Overhead Camshaft)
Displacement:
- 4.2 Liters (4,169 cc)
Horsepower:
- 250 HP (183.87 kW)
Full Throttle RPM Range:
- 5000 - 6000 RPM
Fuel Induction System:
- Electronic Fuel Injection (EFI)
Starting System:
- Electric Start
Lubrication System:
- Wet Sump
Cooling System:
- Water Cooled with Thermostat & Pressure-Controlled Cooling
Ignition System:
- TCI (Transistor Controlled Ignition)
Alternator Output:
- 70 Amps
Gear Ratio:
- 1.75:1
Gear Shift:
- F-N-R (Forward-Neutral-Reverse)
Recommended Fuel:
- Unleaded Gasoline (Minimum Pump Octane 89)
Fuel Tank Capacity:
- Depends on Boat Configuration
Oil Capacity:
- 6.3 Quarts (6.0 Liters) with Filter Replacement
Shaft Lengths Available:
- 20 inches (L), 25 inches (X), 30 inches (U)
Exhaust System:
- Through Propeller Hub Exhaust
Steering:
- Remote Mechanical or Digital Electronic Control (DEC) steering
Weight:
- 562 lbs (255 kg) for 20-inch shaft
- 589 lbs (267 kg) for 25-inch shaft
- 614 lbs (278 kg) for 30-inch shaft
Mounting:
- Transom-Bracket Mounted
Compliance:
- EPA (Environmental Protection Agency) & CARB (California Air Resources Board) 3-Star Rating
Propeller:
- Optional and sold separately
Features:
- Advanced Multi-Point Fuel Injection System
- Variable Camshaft Timing (VCT) for Improved Power and Efficiency
- Command Link Digital Network Compatibility
- High Output Alternator
- Shift Dampener System (SDS), reducing noise and vibration
Safety and Convenience:
- Overheat and Over-Rev Protection
- Diagnostic System
- Freshwater Flushing Device
Applications:
- Ideal for Offshore Fishing Boats, Pontoons, and High-Performance Watercraft
Warranty:
- Limited Warranty: 3 years for recreational use (terms and conditions may apply)
Dealer Recommendations:
- Professional Installation and Regular Maintenance for Optimal Performance
This detailed specification should provide a comprehensive overview of the Yamaha 250 HP 4-Stroke Marine Engine, highlighting its key features and technical details for potential buyers.
Product Specifications
Outboard
Outboard
Engine Type
250 HP 4-STROKE
Lubrication
Wet sump
Fuelinduction
DOHC Fuel Injection VCT
Trim
Power Trim and Tilt
Starter
Electric
Ignition
TCI/Computer
Alternator
12V- 46A
Gears
F N R
Shaftlength
25 or 30/635 or 762(in/mm)
Gear Ratio
2.00:1
Rated Speed
5000 r/min
Displacement
3352 cm3
(3.35L, 204.55in3)
Cylinders Arrangement/Number
V6 (60 degrees)
Weight
274 kg
(604.07lbs)
Stroke
80.5 mm
(3.17in)
Bore
94 mm
(3.70in)
Power
250 HP
(186.40kw)