Description
Product Specification Listing for Marine Engine MERCRUISER D3.6L 180HP
General Information
- Model: MerCruiser D3.6L
- Horsepower: 180 HP
- Engine Type: Inboard
Engine Specifications
- Engine Displacement: 3.6 liters
- Cylinders: 6
- Configuration: Inline 6-cylinder
- Aspiration: Turbocharged
- Cooling System: Closed-loop cooling
Performance
- Full Throttle RPM Range: 2600-3200 RPM
- Max Torque: 350 lb-ft at 2000 RPM
- Fuel System: Common Rail Direct Injection
Dimensions & Weight
- Overall Length: 46 inches (approx.)
- Overall Width: 32 inches (approx.)
- Overall Height: 35 inches (approx.)
- Dry Weight: 1600 lbs
Fuel & Lubrication
- Fuel Type: Diesel
- Fuel Delivery: Common Rail Injection
- Fuel Consumption at Cruise: Approximately 15 GPH (gallons per hour) at 3000 RPM
- Oil Capacity: 8 liters
Electrical Specifications
- Alternator Output: 12V, 120A
- Battery Recommended: 12V marine batteries (dual battery setup recommended)
Operational Features
- Starting System: Electric Start
- Steering System: Compatible with hydraulic and power steering systems
- Cooling System: Closed cooling with heat exchanger
- Exhaust System: Wet exhaust with water lift muffler
Emissions & Compliance
- Emissions Standards: Meets EPA and EU RCD standards
- Type Approval: SOLAS and IMO certified (international maritime standards)
Additional Features
- Instrumentation: Digital and analog gauges compatible
- Monitoring System: MerCruiser VesselView compatible
- Corrosion Protection: MerCathode active corrosion protection
- Warranty: 2-year limited warranty with optional extensions
Optional Accessories
- Propulsion Systems: Compatible with Bravo One, Two, and Three sterndrives
- Instrumentation Packages: Available with VesselView4, VesselView7, and SC1000 displays
- Additional Cooling Kits: Available for warm water applications
- Engine Preheater: Optional for cold climates
Maintenance
- Service Intervals: Every 100 hours or annually, whichever comes first
- Key Maintenance Items: Oil filter, fuel filters, air filters, cooling system inspection, belt adjustment
Installation Requirements
- Mounting: Standard MerCruiser mounts required
- Shaft Alignment: Precise alignment needed due to inline engine configuration
- Ventilation: Adequate ventilation required for engine compartment
For more information on purchasing, installation, and servicing, please contact your local MerCruiser dealer or visit the official MerCruiser website.
