Sunday, November 24, 2024

LOMBARDINI LDW 1904 SD (SAIL DRIVE) - 50 HP

Model: 50 HP

Brand: LOMBARDINI MARINE

Product Specification Listing for Marine Engine LOMBARDINI LDW 1904 SD (SAIL DRIVE) - 50 HP

Product Overview: The LOMBARDINI LDW 1904 SD (Sail Drive) marine engine is renowned for its efficient performance, durability, and reliability. Perfectly tailored for sailing yachts, this 50 HP engine combines the benefits of modern technology with the legacy of Lombardini's engineering prowess.

Key Features:

  • Power Output: 50 HP at 3600 RPM
  • Engine Type: 4-stroke, direct injection, water-cooled diesel engine
  • Displacement: 1910 cc (1.9 liters)
  • Number of Cylinders: 4
  • Aspiration: Naturally aspirated
  • Starting System: Electric start
  • Fuel System: Direct fuel injection system

Technical Specifications:

  1. Engine Dimensions:
    • Length: 1040 mm (including sail drive)
    • Width: 600 mm
    • Height: 900 mm
  2. Weight: Approximately 180 kg (including sail drive)
  3. Cooling System:
    • Type: Freshwater cooling with heat exchanger
    • Water pump: Axial flow impeller
  4. Exhaust System:
    • Type: Wet exhaust system

Sail Drive Unit:

  • Model: Sail Drive SD
  • Gearbox Ratio: 2.7:1 in forward and reverse
  • Propeller: Two or three-blade fixed or foldable
  • Sail Drive Leg: Integrated with double oil-seal system to prevent water ingress

Fuel & Consumption:

  • Fuel Type: Diesel
  • Fuel Consumption at 3000 RPM: Approximately 7 liters per hour
  • Fuel Tank Capacity: Externally mounted as per vessel's requirement

Electrical System:

  • Alternator: 12V, 70A
  • Battery Capacity: Recommended minimum 100 Ah
  • Starter Motor: 12V

Standards and Certifications:

  • Compliance with RCD (Recreational Craft Directive)
  • EPA (Environmental Protection Agency) and IMO (International Maritime Organization) Tier II emission standards

Installation Requirements:

  • Engine must be installed in accordance with Lombardini's guidelines for optimal performance and safety.
  • Proper ventilation and access for maintenance activities should be ensured.
  • Alignment and mounting to be checked thoroughly to avoid vibrations and undue stress.

Maintenance & Service:

  • Oil Change: Every 150 hours or annually
  • Fuel Filter Replacement: Every 300 hours or annually
  • Air Filter Maintenance: Check every 50 hours, replace as necessary

Included Accessories:

  • Control panel and wiring harness
  • Mounting brackets
  • Engine and sail drive installation manuals
  • Standard tool kit for basic maintenance

Optional Accessories:

  • Sail drive propeller options (two-blade or three-blade, fixed or folding)
  • Additional control panel for dual helm stations
  • Remote oil filter and fuel filter kits

Warranty:

  • Standard warranty: 2 years or 1000 hours of operation, whichever comes first
  • Extended warranty options available upon request

Contact Information: For further inquiries, installation support, or ordering, please contact:


Ensure you consult with a certified marine engineer for installation and avoid any voiding of warranty through proper maintenance and adherence to Lombardini's guidelines.

[Product Type: Engine]

Product Specifications

Weight 257 kg (566.59lbs)
Stroke 82 mm (3.23in)
Rated Speed 3200 r/min
Powerkw 36.8 kW
Power 50 HP (37.28kw)
Displacement 1995 cm3 (2.00L, 121.74in3)
Cylinders Arrangement/Number 4
Compression Rate 22:1
Bore 88 mm (3.46in)