MAN V12 - 1550 HP
Model: 1550 HPBrand: MAN
Product Specification Listing: MAN V12 - 1550 HP Marine Engine
General Information:
- Manufacturer: MAN Truck & Bus SE
- Model: V12 - 1550 HP
- Type: High-performance Marine Engine
Technical Specifications:
Engine Configuration:
- Engine Type: 4-stroke, 12-cylinder V-configuration
- Displacement: 24.24 liters (24,240 cm³)
- Bore x Stroke: 128 mm x 157 mm
- Compression Ratio: 16.0:1
Performance:
- Maximum Power Output: 1550 HP (1138 kW) at 2300 RPM
- Maximum Torque: 5580 Nm at 1200-1500 RPM
- Speed Range: 600 - 2300 RPM
Dimensions and Weight:
- Length: 1944 mm
- Width: 1085 mm
- Height: 1260 mm
- Dry Weight: Approximately 2370 kg
Fuel and Consumption:
- Fuel Type: Diesel
- Fuel Consumption: Approx. 233 liters/hour at full load (exact consumption may vary)
- Fuel Injection System: Common rail direct injection
Emissions and Environmental Standards:
- Compliant with: IMO Tier II, EPA Tier 3, EU Stage IIIA regulations
Cooling System:
- Type: Closed-circuit cooling system with heat exchanger
- Raw Water Pump Type: Centrifugal Pump
Lubrication System:
- Type: Wet sump with forced feed lubrication
- Oil Capacity: 72 liters
Electrical System:
- Voltage: 24V DC
- Starter: Electric starter motor
Additional Features:
- Turbocharging: Twin-turbocharged with charge-air cooling
- Control System: Electronic control with advanced diagnostics
- Monitoring: Includes sensors for pressure, temperature, and engine diagnostics
- Optional Features: Various transmission options, remote monitoring, and control
Maintenance Intervals:
- Oil Change: Every 250 operating hours or annually
- Fuel Filter Replacement: Every 500 operating hours
- Air Filter Replacement: Every 1000 operating hours
Applications:
- Suitable for: Yachts, Patrol Boats, Commercial Vessels, Ferries, and other high-speed marine applications
Warranty:
- Warranty: Standard manufacturer's warranty (details vary based on region and application)
Certifications:
- Certifications Available: RINA, BV, ABS, DNV-GL, LR (check for specific certifications as per customer requirements)
Contact Information:
- Manufacturer Contact: MAN Truck & Bus SE
- Customer Support: Available through authorized MAN dealers and service centers globally
This product specification listing is a comprehensive guide to the features and technical details of the MAN V12 - 1550 HP marine engine. For further information or to place an order, please contact your local MAN representative or visit the official MAN Truck & Bus SE website.
Product Specifications
Width
1153 mm
(45.39in)
Weight
2270 kg
(5004.49lbs)
Torque
5200
Rated Speed
2300 r/min
Powerkw
1140 kW
Power
1550 HP
(1155.68kw)
Length
2124 mm
(83.62in)
Fuel Consumption
295 g/kWh
Displacement
24.24 cm3
(0.02L, 1.48in3)
Cylinders Arrangement/Number
V12