Friday, December 27, 2024

JOHN DEERE PowerTech 4045TFM75 - 82 HP

Model: 82 HP

Brand: JOHN DEERE

Product Specification Listing: Marine Engine JOHN DEERE PowerTech 4045TFM75 - 82 HP


General Information:

  • Brand: John Deere
  • Model: PowerTech 4045TFM75
  • Power Rating: 82 HP (61 kW) @ 2400 RPM
  • Type: Marine Engine

Engine Specifications:

  • Engine Type: 4-Stroke, In-line, Wet Liner
  • Displacement: 4.5 L (275 cu in)
  • Number of Cylinders: 4
  • Bore & Stroke: 106 x 127 mm (4.19 x 5.00 in)
  • Compression Ratio: 19.0:1

Performance Specifications:

  • Rated Speed: 2400 RPM
  • Idle Speed Range: 600 - 1200 RPM
  • Maximum Torque: 361 Nm (266 lb-ft) @ 1400 RPM
  • Fuel System Type: High-pressure Common Rail (HPCR)

Fuel and Emissions:

  • Fuel Type: Diesel
  • Emission Certification: IMO Tier II, EPA Marine Tier 2

Cooling System:

  • Cooling Type: Heat exchanger or keel-cooled
  • Coolant Capacity: 7.95 L (8.4 qt)

Lubrication System:

  • Lubrication Type: Pressure lubrication
  • Oil Capacity: 13.2 - 18.9 L (14 - 20 qt)

Electrical System:

  • Voltage: 12V or 24V
  • Alternator: 12V-40A or 24V-25A (standard), 70A optional

Dimensions and Weight:

  • Length: 998 mm (39.3 in)
  • Width: 767 mm (30.2 in)
  • Height: 1041 mm (41.0 in)
  • Weight: 632 kg (1392 lbs)

Optional Accessories:

  • Pre-installed wiring harness
  • Custom mount configurations
  • Varied gear ratio transmissions
  • Engine displays and monitoring systems

Applications:

  • Workboats
  • Barges
  • Dredges
  • Ferries

Manufacturer Warranty:

  • Standard Warranty: 2 years or 2,000 hours

Contact Information:

  • Manufacturer: John Deere
  • Customer Support: [Insert Contact Information]
  • Website: [Insert John Deere Marine Engines URL]

Additional Notes:

  • Always consult manufacturer’s manual for detailed installation and maintenance instructions.
  • Custom configurations and services might be available upon request.

Disclaimer:

  • Specifications are subject to change without notice.
  • Performance data is dependent on installation parameters and conditions.

This comprehensive product specification listing reflects the features and capabilities of the John Deere PowerTech 4045TFM75 marine engine, providing a detailed overview for potential buyers or integrators.

[Product Type: Engine]

Product Specifications

Widthin 28.0 in
Width 712 mm (28.03in)
Weightlb 1019 lb
Weight 462 kg (1018.54lbs)
Strokein 5.00 in
Stroke 127 mm (5.00in)
Rated Speed 1500 r/min
Powerkw 61 kW
Power 82 HP (61.14kw)
Lengthin 34.8 in
Length 885 mm (34.84in)
Displacementin3 275 in3
Displacement 4.5 cm3 (0.00L, 0.27in3)
Cylinders Arrangement/Number 4
Compression Rate 17.6:1
Borein 4.19 in
Bore 106.5 mm (4.19in)