NIIGATA 6-25CX 1375.9HP
Model: 6-25CXBrand: NIIGATA
Product Specification Listing: Marine Engine NIIGATA 6-25CX 1375.9HP
General Information
- Engine Model: NIIGATA 6-25CX
- Manufacturer: Niigata Power Systems Co., Ltd.
- Application: Marine propulsion
- Type: Diesel engine
- Power Output: 1375.9 HP (Horsepower)
Key Specifications
Configuration:
- Number of Cylinders: 6
- Engine Type: In-line
- Cycle: 4-stroke
Dimensions & Weight:
- Overall Length: [Specify if available]
- Overall Width: [Specify if available]
- Overall Height: [Specify if available]
- Dry Weight: [Specify if available]
Performance:
- Rated Power Output: 1375.9 HP
- Rated RPM: [Specify Rated RPM]
- Bore x Stroke: [Specify bore diameter and stroke length]
- Displacement: [Specify total engine displacement]
- Compression Ratio: [Specify compression ratio]
- Fuel Consumption: [Specify fuel consumption rates if available]
Fuel System:
- Type: [Specify type, e.g., direct injection, common rail]
- Fuel Type: Diesel
- Fuel Injection Pressure: [Specify if available]
Cooling System:
- Type: [Specify type, e.g., water-cooled]
- Coolant Capacity: [Specify capacity if available]
- Heat Exchanger: [Specify if included]
Lubrication System:
- Type: [Specify type, e.g., forced lubrication]
- Oil Capacity: [Specify oil capacity]
- Oil Type: [Specify recommended oil type]
- Oil Filter: [Specify type and number of oil filters]
Air System:
- Turbocharger: [Specify if available and type]
- Air Filter: [Specify type]
- Intake/Exhaust Manifold: [Specify materials and design if available]
Electrical System:
- Voltage: [Specify voltage for the electrical system, e.g., 12V, 24V]
- Starter: [Specify type, e.g., electric starter]
- Alternator: [Specify power output if available]
Emissions:
- Emission Standards: [Specify compliance with emission standards, e.g., IMO Tier II, Tier III]
Compliance and Certifications:
- Classification Society Approvals: [Specify if approved by societies such as ABS, DNV GL, Lloyd's Register]
- Safety Standards: [Specify any compliance with safety standards]
Additional Features:
- Monitoring Systems: [Specify any integrated engine monitoring systems]
- Remote Control Options: [Specify availability of remote control mechanisms]
- Redundancy Systems: [Specify if engine has built-in redundancy features]
Accessories and Optional Equipment:
- Marine Gearbox: [Specify available marine gearbox options]
- Engine Mounts: [Specify if included]
Service and Maintenance
- Maintenance Intervals: [Specify maintenance intervals]
- Warranty: [Specify warranty terms]
Contact Information
Manufacturer Contact:
- Niigata Power Systems Co., Ltd.
- [Provide contact details such as address, phone number, email]
Customer Support:
- [Provide customer support contact details]
Note: Specific details like dimensions, rated RPM, bore x stroke, displacement, compression ratio, and consumption rates should be filled based on the exact manufacturer’s data sheet or technical manual for the NIIGATA 6-25CX engine.
Please consult Niigata Power Systems Co., Ltd. or the respective authorized dealer for the most accurate and detailed information.
Product Specifications
Competitor Products
Caledonian Towage Tugs Receive Engine Overhauls
Marine engineering specialist Royston said it recently completed the extensive inspection, overhaul and service of the main and auxiliary engines and associated components, as well as both azimuth propulsion units…
Japan Trio Begins Work on an Ammonia-Fueled Tugboat
As the marine industry works to find the ‘fuel of the future’ to address increasingly stringent emission regulations, an interesting development from a trio of marine powers in Japan seeks to develop the world’s first ammonia-fueled tugboat.
Royston Bringing Advanced Monitoring Tech to SMM
Advanced fuel monitoring and energy management technology, designed to deliver significant cost benefits for vessel operators, will be among the key attractions on the Royston diesel power SMM stand.Royston…
Royston Appointed as Niigata Representative in Nigeria
Independent diesel engine service company Royston has been appointed service, sales and parts agent for Niigata diesel engines in Nigeria. Royston has been a long-standing representative for Niigata in the UK and Ireland…
Royston Expands UK Engineering Facilities
Royston Diesel Power has doubled the size of its UK engineering facilities to support continuing global growth in its marine engine service business and new technology development. As part of a £500,000 ($676…
A New Breed of Tug
When markets expand niches are created, goes the logic. For builders of tugs, that market is “floating gas” and the expanding use of liquefied natural gas, or LNG, as a fuel. In support of LNG, there’ll…
Striking Bollard Pull Results for ALP Striker
ALP Striker achieved an impressive and most satisfactory bollard pull results of 309.6 tonnes during her sea trials. The DP II Anchor Handling Salvage Tug was delivered on 12 September to ALP Maritime Services.
Royston Debuts Engine Diagnostics Service
Diesel power specialist Royston has expanded upon its traditional engine service and repair business with the introduction of a new engine diagnostics, health check and consultancy service. This follows…
Ningbo Port Orders New Dual-fuel Tug
Robert Allan Ltd. On October 21, Robert Allan Ltd. was awarded a contract by Ningbo Port Company Ltd. in China for a RAstar 4200-DF Class dual-fuel (LNG-MDO) tug. The award of this contract builds on a…
NYK Gets Japan's First LNG-Fuelled Tug
NYK Line has taken delivery of Japan’s first liquefied natural gas (LNG)-fueled tugboat from Keihin Dock. "The new tug, named Sakigake, was delivered by Keihin Dock Co. Ltd and is expected confirm the…
ClassNK Approves Niigata’s Dual-fuel Engine
ClassNK granted type approval to the new 28AHX-DF dual-fuel engine built by Niigata Power Systems Co., Ltd. Whilst the adoption of emerging maritime technologies can prove challenging due in part to the time required to gain approval…
ClassNK Approves Niigata Dual-fuel Engine Design
Classification society ClassNK has granted approval to the design of the new 28AHX-DF dual-fuel engine developed by Niigata Power Systems Co., Ltd. The new engine is slated to be used as the main engine…
DNV GL to Class ALP's Ocean-Going Tugs
DNV GL congratulates ALP Maritime Services on the development of its next-generation “ALP Future Class” ocean going tugs. The vessels, developed by Ulstein Design & Solutions in close cooperation with ALP Maritime Services (ALP)…
Cat Power Solution for Teekay Offshore
Caterpillar Marine announced that Cat power and propulsion offerings have been selected to provide complete propulsion solutions for four ocean-going towing vessels designed by Ulstein Design and Solutions.
Pon Power Supplies Engines, Gensets for ALP, Ulstein
Pon Power Scandinavia, a supplier of marine power and propulsion systems, announced that the company has been contracted by ALP Maritime Services and Ulstein Design & Solutions to provide engines and gensets to four oceangoing AHTS.
CIMAC World Congress May 2013
The CIMAC World Congress on Combustion Engine Technology for Ship Propulsion, Power Generation and Rail Traction was held from May 13-16 in Shanghai. The Technical Program of this CIMAC Congress reflected a host of current hot topics…
Teijin SCR Helps Ships Cut NOx Emissions
Teijin Engineering Ltd. announced its development and launch of a selective catalytic reduction (SCR) denitration device for midsized ship engines to ensure compliance with the Tier III NOx (nitrogen…
RotorTug RT Ambition Arrives in Bremerhaven
On November 16 KOTUG´s new build RotorTug RT Ambition arrived in Bremerhaven. The tug left ASL Singapore Shipyard on September 22, 2012 and sailed under own power. RT Ambition measures 32 x 12 m, with a installed power totaling 6…
First Voith Water Tractor with Fully ECS
Shipowner Fukushima Kisen based in Iwaki on the east coast of Japan has commissioned the first Voith Water Tractor (VWT) with a fully electronic control system (ECS). On the ECS version, the hydraulic…
Royston Appoints New Operations Manager
Simon Richardson has been appointed as operations manager for diesel engineering specialists Royston Ltd. The appointment follows the retirement of Peter Millen after 30 years with the company. Simon took…
Signet to Deliver and Christen Newest Tug
Signet Maritime Corporation announced that its newest tug, a Robert Allan designed RAmparts 3200 Class ocean towing and escort tug, M/V SIGNET WEATHERLY, will be delivered on March 10, 2012, from Signet Shipbuilding & Repair in Pascagoula…
AKA, Niigata Team on Hybrid Marine Propulsion Package
Aspin Kemp & Associates (AKA) and Niigata Power Systems Partner to Provide Hybrid Marine Propulsion Package Dartmouth, NS – 01/25/2012 Aspin Kemp & Associates (AKA) is proud to announce a partnership agreement…