BETA 30 HP

Product Specification Listing: BETA 30 HP Marine Engine

General Information

• Manufacturer: Beta Marine
• Model: BETA 30 HP
• Type: Marine Diesel Engine
• Rated Power: 30 HP (22.1 kW)
• Displacement: 1123 cc
• Configuration: 3-cylinder, naturally aspirated
• Compliance: EPA Tier 3, RCD II

Dimensions & Weight

• Length: 757 mm (29.8 in)
• Width: 532 mm (20.9 in)
• Height: 563 mm (22.2 in)
• Dry Weight: 150 kg (330 lbs)

Performance

• RPM Range: 1800 - 3600 RPM
• Fuel Consumption: Approximately 3.2 liters/hour at 2800 RPM
• Maximum Torque: 77.4 Nm at 1600 RPM

Engine Features

• Cooling System: Freshwater cooling with heat exchanger
• Lubrication System: Forced lubrication with a spin-on oil filter
• Starting System: Electric start with 12-volt system
• Governor Type: Mechanical

Fuel System

• Fuel Type: Diesel
• Fuel Injection: Indirect injection
• Fuel Pump: Mechanical fuel pump
• Filtration: Primary and secondary fuel filters

Electrical System

• Alternator Output: 40 Amp, 12-volt
• Battery Requirement: 12-volt, 75 Ah minimum
• Instrumentation: Standard panel with tachometer, hour meter, and alarm systems for low oil pressure, high water temperature, and battery charging

Transmission

• Gearbox: Technodrive TMC 60 (2.1:1 reduction as standard, other ratios available)
• Drive Type: Sail drive or inboard marine transmission
• Propeller Shaft: 25 mm diameter standard

Exhaust System

• Exhaust Type: Wet exhaust with water injection bend

Optional Features

• Hot Water Take Off: Optional connections for calorifier
• Marine Alternator: Optional high-output alternator
• Control Panels: Deluxe control panel options with additional monitoring

Standard Accessories

• Anti-Vibration Mounts: Installed
• Engine Controls: Single lever morse control
• Engine Spares: Toolkit, spare filters, and belt provided
• Manuals: Operator’s manual and installation guide

Installation Requirements

• Cooling Water Intake: Through-hull fitting with seacock
• Exhaust Setup: Waterlock and anti-siphon loop required
• Mounting: Approved engine beds with anti-vibration mounts

Warranty

• Duration: Standard two-year warranty
• Coverage: Limited to defects in material and workmanship
• Service: Supported by global dealer network

Contact Information

• Beta Marine USA: [Insert Contact Details]
• Website: www.betamarineusa.com
• Customer Support: 1-800-MARINE-HELP

This product specification listing offers detailed core information for the BETA 30 HP Marine Engine. Refer to the official Beta Marine installation manual and documentation for comprehensive guidelines. For further customization, consult directly with Beta Marine representatives.