MERCURY 20 HP 4-STROKE 20 HP
Model: F20 4SBrand: MERCURY
Certainly! Below is a detailed product specification listing for the Mercury 20 HP 4-Stroke Outboard Engine:
Product Specification Listing: Mercury 20 HP 4-Stroke Outboard Engine
General Information:
- Product Name: Mercury 20 HP 4-Stroke Outboard Engine
- Model Number: (Typically an alphanumeric code provided by the manufacturer, e.g., M20F)
- Category: Marine Engine
- Manufacturer: Mercury Marine
- Engine Type: 4-Stroke
Engine Specifications:
- Horsepower: 20 HP
- Engine Displacement: 333 cc (20.32 cubic inches)
- Cylinders: 2
- Induction System: Single Overhead Camshaft (SOHC)
- Bore and Stroke: 2.40 in (61 mm) x 2.24 in (57 mm)
- Fuel Delivery System: Electronic Fuel Injection (EFI)
- Starting System: Manual or Electric Start
- Cooling System: Water-cooled with thermostat
- Trim Positions: 6
Performance and Drive:
- Full Throttle RPM Range: 5400-6100 RPM
- Gear Ratio: 2.15:1
- Steering: Tiller Handle or Remote (varies by model)
- Gear Shift: F-N-R (Forward-Neutral-Reverse)
Dimensions and Weight:
- Transom Height:
- 15 in (381 mm) for Short Shaft
- 20 in (508 mm) for Long Shaft
- Dry Weight:
- Manual Start: 99 lbs (45 kg)
- Electric Start: 112 lbs (51 kg)
Fuel and Oil:
- Fuel Type: Unleaded Gasoline (minimum 87 Octane)
- Fuel Tank: Separate (external) Portable Fuel Tank, usually 3.2 gallons (12 liters)
- Oil Type: SAE 10W-30 Marine 4-Stroke Engine Oil (recommended by Mercury)
- Oil Capacity: 1.1 Qt (1.04 L) with filter
Accessories and Features:
- Alternator Output:
- Manual Start: 6A, 76W (optional)
- Electric Start: 12A, 145W
- Propeller:
- Standard 3-blade aluminum
- Various sizes and materials available as optional accessories
- Engine Protection:
- Low Oil Pressure Warning
- Over-Rev Limiter
- Overheat Warning
- Shallow Water Drive: Standard
- Power Tilt and Trim: Optional
- Anti-Corrosion: Saltwater protection with anodized coating
Certifications and Standards:
- Emission Standards: EPA and CARB (California Air Resources Board) 3-Star Ultra-Low Emissions
- Safety Standards: Meets all relevant standards set by the U.S. Coast Guard and other maritime authorities
Warranty:
- Warranty: 3-year limited warranty by Mercury Marine (may vary by country/region)
- Service Support: Comprehensive global service network with authorized dealers
Additional Information:
- User Manual and Maintenance Kit: Included
- Optional Accessories:
- Engine Cover
- External Fuel Tanks of different capacities
- Propeller upgrades
- Remote Steering Kit
- Fuel Line Assembly
Note: Specifications are subject to change by the manufacturer without prior notice. Always refer to the official Mercury Marine documentation for the most accurate and detailed information.
Contact Information:
- Customer Support: [Mercury Marine Customer Support Link/Phone Number]
- Website: [Mercury Marine Official Website]
This specification should provide a comprehensive overview of the Mercury 20 HP 4-Stroke Outboard Engine suitable for potential buyers or dealers.
Product Specifications
Outboard
Outboard
Engine Type
20 HP 4-STROKE
Steering
Remote or tiller
Lubrication
Wet sump
Fuelinduction
2-valve single overhead cam
Trim
6 or power tilt
Exhaust
Through prop
Starter
Manual or electric
Ignition
CDI w/electric spark advance
Alternator
12V/11 amp
Gears
F N R
Shaftlength
15 or 20/381 or 508(in/mm)
Gear Ratio
2.15:1
Rated Speed
5400 r/min
Displacement
351 cm3
(0.35L, 21.42in3)
Cylinders Arrangement/Number
2
Cooling
Water-cooled w/thermostat
Weight
52 kg
(114.64lbs)
Stroke
60 mm
(2.36in)
Bore
61 mm
(2.40in)
Power
20 HP
(14.91kw)