EVINRUDE 115 HP V4 E-TEC H.O 115 HP
Model: E115Brand: Evinrude
Sure! Here is a detailed product specification listing for the Evinrude 115 HP V4 E-TEC H.O (High Output) marine engine:
Evinrude 115 HP V4 E-TEC H.O. Marine Engine
General Information:
- Model Name: Evinrude 115 HP V4 E-TEC H.O.
- Manufacturer: Evinrude (BRP – Bombardier Recreational Products)
- Engine Type: Outboard Motor
- Horsepower (HP): 115 HP
- Model Year: [Applicable Year]
Engine Specifications:
- Engine Type: V4 (Four-cylinder)
- Displacement: 1,726 cc (105.4 cubic inches)
- Fuel Induction: E-TEC Direct Injection
- Bore and Stroke: 3.60 in x 2.588 in (91 mm x 66 mm)
- Engine Management: EMM (Engine Management Module)
Performance Specifications:
- Full Throttle RPM Range: 5,500 - 6,000 RPM
- Alternator Output: 133 Amps (total), 50 Amps (net dedicated)
Fuel and Lubrication:
- Fuel Type: Unleaded gasoline (minimum 87 octane)
- Oil Type: XD100 Oil (E-TEC Synthetic blend oil recommended)
- Fuel Tank: Optional - Not onboard
Dimensions and Weight:
- Shaft Lengths: Available in 20" (long) and 25" (extra-long)
- Weight: Approximately 390 lbs (177 kg), depending on configuration
Features:
- Starting System: Electric Start
- Trim and Tilt: Power Trim and Tilt
- Cooling System: Water-cooled with thermostat
- Steering: Remote/Command
- Exhaust System: Through prop exhaust
Electronic and Control Features:
- Smart Engine Management: Engine Guardian System
- Integrated Digital Gauges: Optional i-Command Digital Gauges
- NMEA 2000 Compatibility: Yes
Environmental Compliance:
- CARB Rating: Three-Star Ultra-Low Emissions
- EPA Compliance: 2010 Compliant
Additional Options and Accessories:
- Propeller Options: Various stainless steel and aluminum props
- Engine Covers: Optional
- Rigging Kits: Optional
Warranty and Support:
- Warranty: [Standard Warranty Period]
- Service Network: Extensive service network available globally
Contact and Sales Information:
- Authorized Dealers: [List of Authorized Dealers or Find the nearest dealer link]
- Customer Support: [Customer Support Contact Information]
Note: Always consult the most recent owner's manual and product documentation for the most accurate and detailed information specific to your engine model and year.
This comprehensive outline covers critical aspects of the Evinrude 115 HP V4 E-TEC H.O. engine. Adjust dates or specific details as needed for the most current and applicable information.
Product Specifications
Outboard
Outboard
Engine Type
115 HP V4 E-TEC H.O
Steering
Remote or Accessory Tiller
Lubrication
Multi-point, targeted oiling
Fuelinduction
E-TEC Direct Fuel Injection w/stratified low RPM combustion mode
Trim
FasTrak Power Trim and Tilt
Exhaust
Through prop
Starter
Electric
Ignition
IDI Fast Rise Inductive Ignition
Alternator
133 Amps Total Output / 50 Amps Net Dedicated
Gears
F N R
Shaftlength
20 or 25/508 or 635(in/mm)
Gear Ratio
2.0:1
Rated Speed
5500 r/min
Displacement
1727 cm3
(1.73L, 105.39in3)
Cylinders Arrangement/Number
V4
Cooling
Pressure and Temperature Controlled Water Cooled
Weight
177 kg
(390.22lbs)
Stroke
66 mm
(2.60in)
Bore
91 mm
(3.58in)
Power
115 HP
(85.74kw)